Parting out a complete rust free 1972 BMW 3.0CS coupe

[BradCSI]

I am parting out a complete rust free 1972 BMW 3.0CS coupe.
most every part available for the car. I will sale the parts to you at well below market value.

Here is a small sample of what is available:

*Completly rebuilt 3.0 engine with webbers and all it components including working A/C with less than 2000 miles

* Two new un-used webber carbs

* 4 spd transmission with fresh cluch, presser plate and bearing

* Limited slip differential and axels

* Rust free Texas car with all body panels including doors, hood, trunk, finders, quarter panels, trunk panels, rocker panels, floor panels, shock towers, strut panels

* Perfect bumpers, grills, tail light , marker lights and trim

* All glass window panels available

* All interior parts (Tan interior) including a/c control pannels, instrument panel, dash panels, arm rests

* Many more parts not listed, this is a complete car

You may call me at 972-207-1115 or e-mail me

Thanks,
Brad

[velocewest]

Out of curiosity, if the car isn't wrecked, mechanically disabled or rusted out, why are you parting it?

[BradCSI]

The engine transmission and differential are already out of the car and I took a few parts off for my other 3.0Csi

[BradCSI]

I would be willing to sale the car complete, if anyone wants to put it back together. The front cloth seat covers look bad and it needs carpet. It also needs paint, but no body work.


Thanks,
Brad

[recoupe]

How much would you want for the car and what exterior color was the car originally?

Thanks

[BradCSI]

How much would you want for the car and what exterior color was the car originally?

Thanks

Hello,
I am very sorry, but I have already made sales commitments on some of the major parts including the engine.

Thanks for your intrest,
Brad

[major]

Brad,

I need the lower chrome trim strip for the front door as well as the tan plastic covers for the window crank cutouts. Could you let me know if these are available and if so, how much are asking for them?

regards,

Amar

[ol'army]

Brad,

I would be interested in the rear clip from the door jamb back including the rear bumpers, gas tank and gas filler door. Don't need the hood, glass or parts of the roof.

Alternatively the entire shell w/o doors trunk or hood would be fine too unless you have already promised off large body parts.

I'm not in a rush.

Thanks

Victor Montes, Architect
Originally from Tyler
Dunn Loring, VA

[Jonathan]

Brad,

I need the lower chrome door strips on both sides and I will pay you top dollar for them if they are in very good condition.

Please advise,
Jonathan

[BradCSI]

[quote="ol'army"]Brad,

I would be interested in the rear clip from the door jamb back including the rear bumpers, gas tank and gas filler door. Don't need the hood, glass or parts of the roof.

Alternatively the entire shell w/o doors trunk or hood would be fine too unless you have already promised off large body parts.

I'm not in a rush.

Thanks

Victor Montes, Architect
Originally from Tyler



Victor,
I beleave I can meet your request. I would like to cover your needs and requirements in person over the phone. Could you call me at 972-207-1115

Thanks
Brad

[BradCSI]

Brad,

I need the lower chrome door strips on both sides and I will pay you top dollar for them if they are in very good condition.

Please advise,
Jonathan

Jonathan,
They are in very good condition. I would take $80 for both, Plus Shipping.

Thanks,
Brad

972-207-1115 Cell
Dallas Texas

[Ephriam K. Williams]

Brad...
I'm in Houston, and I'm looking for another good body. What color is the exterior of the car? How much would you want for the entire rolling shell? What are the problemed rust areas? Please Sir... very interested. Thank You for your time in this matter. You can reach me at: ephriamw@hotmail.com

Regards

[inmantua1]

looking for a tool box

[dave v. in nc]

Hi Brad, Is anything left? Thanks, Dave

[BradCSI]

Hi Brad, Is anything left? Thanks, DaveDave,

I have most of the parts.



Here is what is missing.



1. Front bumper

2. Carpet

3. Driver side rear electric window regulator

4. AC compressor

5. Engine, but I have a lot of engine parts available

6. Pass side door panel



All the rest the rest is their and generally in good shape.



Let me know what you need. Tell me the price you are willing to pay. If the price is fair the parts are yours.





Thanks,

Brad

Bradford.bowen@hotmail.com

972 207-1115 cell

[inmantua1]

Hello brad,

I am lloking for the tool box that is connected to the underside of the trunk. I have all the tools, it is only the hlder that I am looking for. Also the lining of the trunk and the surround for the drivers seat release nob? Do you have these parts available? if so what color are they and how much do you want?

[Mike Pelly]

Brad.
looking for L and R side outer rocker panel covers. Also need side vents and hood grills if they are in good shape with no broken tips. Do you have the rear bumperettes? (the two small pieces that attach under the bumper)

[dtortoise8]

I need the chrome connecting piece for the rear bumper if you are will ing to sell it.
Kurt

[JWhitney]

Hi Brad:

I was wondering if you still had the carbs? Do they come with the conversion kit to change out the zeniths for them? How much would you want for them? email to jkwcpamp29@aol.com

Jon W.

[Mario L.]

I need a left rear light lens . . no need for the bulb holder, but lens needs to be in good condition . .

[seanwil]

Hi Brad,

I may be a bit late here and also not sure about the feasibility of posting to Dublin.

I'm looking for a RHS front window motor and a RHS sun visor hinge bracket.

Regards
Sean

[BradCSI]

Hi Brad,

I may be a bit late here and also not sure about the feasibility of posting to Dublin.

I'm looking for a RHS front window motor and a RHS sun visor hinge bracket.

Regards
Sean

Hello Sean,

I have both parts. $125 US for the right hand front window motor and $25 US for the RHS visor complete with hinge and bracket, plus shipping. (The right hand side interior parts do fair better better on the left hand drive cars.)

Thanks,
Brad

bradford.bowen@hotmail.com

[niacc]

headlight switch?

[BradCSI]

Richard,
Pretty sure we have power window switches, right side turn signal and a trunk tool kit. I have to check on the glove box for you. I do not have the rear taillights. We also have one Zenith carb. Send me your email at carcollections@att.net and I can get you photos and pricing.
Brad

[bimmerboy73]

Brad,

Thanks so much!

Emailed you.

[bimmerboy73]

Brad

Do you still have the center console?

Thanks

[John H.]

I am looking for the drivers door wood trim. Is it in good shape? Thanks, John H. 213.400.4945 cell or corkybucek@sbcglobal.net

[askdchief]

Brad is both doors in excellent condition if they are how much to u want for them.


Ernie

[pldlnr]

Hello, I am looking for a driver's side rocker and passenger side fender. Do you have these available? Thanks very much

[peteinjapan]

Need a set of front calipers if you've got them.

Pete

[BradCSI]

Need a set of front calipers if you've got them.

Pete

Pete,
I have a good set of front calipers, if you give me a call we can discuss the pricing.

Thanks,
Brad
972-207-1115
bradford.bowen@hotmail.com