Setting Valves M30 vs M10

[decoupe]

Is the proceedure for setting the valve clearances on the m30 block the same as the m10? The "architecture" looks the same and my e21 is the test bed for my learning curve. Any special hints, tools and don't go there's would also be appreciated.

Found this protocal which would be my starting point.

http://www.3dtriad.com/e21/

Doug

[x_atlas0]

http://www.bmwe34.net/e34main/maintenance/engine/valve_adjust.htm

Everything you need to know.

[decoupe]

Thanks - pretty much the same.