cold idle

[Knut]

I fire my csi up, and then it runs at 3000rpm until it has reached operating temperature. Anybody has a cure for this problem?
Knut

[Malc]

You could have the following:

1]... Sticky airslide
2]... bad temperature sensors or wiring
3]... Cold start injector is not shutting off, unplug when engine running but cold.
4]...Throttle position switch
Assuming warm engine idle is ok and CO emissions is within range check all your wiring, sensors etc first, plus check for any air leaks / spli hoses etc especially in the air slide side of things
HTH
Malc