Search results

The wheel is NLA, thank you.

You are right gentlemens - S40 have no tension springs, sorry for inconvenience. ;)

Ballast resistor is 11 Coil 10 Distributor 12 Ignition distributor sensor 99 (on the picture is showed CSI) but for CS you should have green wire anyway Black and Green go down to diagnostic plug Red/Black to the starter

Don't get me wrong, but you have wrong thinking of LSD work. When both wheels are loosen - mechanism is locked & both wheels should spin in the same direction. In good working diff - for example LSD 25% mean that until torque reach ca. 5mkp (difference between the wheels) - mechanism could not...

Also the frames of the front seats - early vs. late are different, later are slightly stiffer & higher. From the outside they look much alike (vertical vs horizontal lines) but inside they are different.

It might be an LSD with worn parts inside (dog ears/friction discs/tension springs plates). 11:38 = 3.45 ratio = 2800cs If it was just a working non-LSD diff your opposite wheel should spin other direction while hand spinning of the first one.

Yes, it's correlated with window switch - the early blinds have same curved shape frame as early switch & the later have same flat shape frame as later switches Changed in 73' when sardine style window motor was changed for the one with integrated gearbox, also wiring changed. Here you have an...

Yes, the grip is thicker than OEM wheel & little bit softer.

...still available

...still available

still available

It's 80's Momo C38, so not era correct for e9

bavbob is right - upper one is just 1mm sqaure washer, you can make it by your own even from scrap metal or stainless. Lower one is hokey style bumper & is more complicated

...up

...up

...up

Hello, have for sale new, never used horn contact ring for Petri steering wheel. Fit all 3-ring (35, 38, 40cm - 2002, e9) or 4-ring (38cm - e9 csl) bmw petri hubs. Very good quality, nicely made reproduction. Set will consist of horn contact ring & mounting bolts and rivets as on picture, M3...

Hello Gentlemens, for sale i have a foam Petri 838 steering wheel in nice condition, diameter ca. 38cm Spokes/metal part was re-painted in black satin. Hub is original BMW Petri with original rubber hub cover. Petri BMW horn button; Steering wheel is complete & ready to run in E10. If someone...

Hello Gentlemens, for sale is foam Petri 836 steering wheel in nice condition, diameter ca. 36cm Spokes/metal part was re-painted in black satin. Hub is custom made on lathe of aluminium with added original BMW splines part bolted from below with added metal adhesive in between + custom plastic...

Hello Gentlemens, for sale i have an early model of leather Raid 36cm sport steering wheel in nice condition, very pleasant wheel. Aluminium spokes are in original black anodizing, grip have original leather, hub is original Raid 22 (for BMW), horn button is also original Raid. Steering wheel...