Search results

OK I should be able to find a couple more Let me know your address and you can just pay the shipping and make a small donation to the forum and they are yours Thanks, Rick

I can't believe that I don't have 8 of the same brand 8 X 20 in all of what I have I do have 10 Kamex 8 X 25 if you want them ( all 8.8 ) I can look for 2 more and I should have the 6mm bolt Let me know Thanks, Rick

I should have that as well

Is it just bolts that you want? no washers? so, it is 8 of M8 X 20 and what size are the other 4 ? I probably have all the bolts that you need. Cleaned and plated zinc yellow I save up nuts and bolts as I wreck some stuff and save from jobs, then I go through a couple of...

Well, last one that I sent out was to Texas, if I remember right, it was 65.00 US to send by Canada Post, cheaper than USPS from Blaine WA or Fed ex, UPS by a lot So shipping is quite reasonable considering the size of the box for the part. Thanks, Rick

bumperoo to the top

bump to the top

bump to the top

If you have lost that much oil, there must be a huge spill underneath the car. I would find a place to do the repairs and then have it towed there. There are six liters of oil in the engine, if it all came out over the winter, once started, it could come out a lot faster tows are cheaper than...

These work very well for fixing cracks around the diff support or even when they are not cracked, adds to stopping what will eventually crack I remember welding in so many of these into 6 and 7 series cars at the dealership many many years ago Thanks, Rick

Tried and couldn't do it

it is a b&**^%h to do and get at in the best of times, it is tucked away in the corner of the firewall and back end of the inner fender Try loosening the steel lines and pulling them down enough to get to the hose Thanks, Rick

I have a mono radio ( older blaupunkt ) that I want to run into an amp to two speakers Any suggestions? Thanks, Rick

Thanks but no, it won't Thanks, Rick

Still available need to get this out of shop make offer Thanks, Rick

Still for sale great piece Thanks, Rick

Still have 2 sets available!! Thanks, Rick

Have now found everything Thanks to all that replied BUT I do need a hood support bar set up thought that I had one but it was for a 2002 Thanks, Rick

There is a fellow on the 2002FAQ site that is selling a set of rear calipers that look to be rebuilt. He has mistakenly called them frt tii calipers may want to check that out Thanks, Rick

Be careful of running a car on a 2 post lift for very long. The rear axles are in full droop and there is a lot of deflection and unnatural load on the CV's. If it aint broke leave it alone When you do replace it, then set it up properly straight and a small preload. Thanks, Rick