WTB: Weber 40 DCOE angled stacks

[Phemisg]

Angled air horn velocity stacks.

 

[Stevehose]

Those are very hard to find, you can try posting on the Alfa boards, but finding 6 that match is a rare bugger indeed, I've tried.

 

[Bavman]

I have 4 for sure, possibly 6....as I am one of those ALfa guys!

Email me direct at [email protected]


Al

 

[rodspock]

Bavman,

I would be interested in three of these angled stacks if you have enough remaining after Phemisg buys some.

PM me if there are enough available.

Cheers,

Rod
(Australia)

 

[Tom P]

Bavman, any chance to have these spec'd for possible reproduction? Someone here may have resources. Interested in six myself and have tried unsuccessfully on a few attempts myself so I now what you're saying about the challenges to find them...

 

[Stevehose]

I would also be interested in reproductions

 

[Bavman]

I have emailed the OP, I have 3 angled long horns for 40's, 2 short angled horns for 45's, 4 NEW straight long for 40's, 4 90 degree horns for 40's. Will let yall know in order of response if he takes the angled horns.

I also have some bolt on short stacks and lots of choke tubes etc.


\Thanks

Al

 

[Stan]

I can see if my cousin can make them
What do they sell for?
How many would be made?
Can I borrow a sample?

 

[Arde]

I can see if my cousin can make them
What do they sell for?
How many would be made?
Can I borrow a sample?

Your Chinese cousin?

 

[JFENG]

Choices

Avail from Alfa sources.
Get an Alpina airbox setup
Get. Local guy to fab up a set with some alloy J-tube and some straight stacks for their bases and flairs. Eg. Cut, splice in the J tube.
Print them in halves on your 3d printer and epoxy together