Search results

  1. Ajay

    Chrome polish product recommendation

    Gary, I have to say that QUICK-GLO is also a really really good chrome cleaner and rust remover. I have taken extremely rusty tools, mirrors, and all types of chrome to an almost new finish. It also leaves a waxy feel that super smooth. Try this with a 0000 steel wool on extremely rusted...
  2. Ajay

    pictures of reassembling the sub axles into the rear A arm?

    Here is what I used when I reassembled mine. Copy amd pasted this diagram on a ms word document and made it bigger. Harbor Freight sells a Bearing press that worked fine for my reassembly as well.
  3. Ajay

    WTB - M30 complete but not rebuilt HEAD w/ all the parts needed to rebuild

    I dont think we have met but I see you are local in south OC, I am in Irvine and my cars are in Santa Ana. The rebuilt head for the b34 I would probably sell for what I paid to have it redone. The other 2 heads dirt cheap to clear space. The one that is on the shelf is complete and I see early...
  4. Ajay

    Seat Rail

    Early e10, 2002, 1800, 1600, etc seat rails will work. They must have the notch in the front similar to the e9 rails.
  5. Ajay

    WTB - M30 complete but not rebuilt HEAD w/ all the parts needed to rebuild

    I may have 2 that are really clean, one of which may be rebuilt for a B34 motor, and 1 on a complete 633 motor that may work for what you need. Seems like you are local as well.
  6. Ajay

    WTB Seat Rail

    Early e10 rails work also. They need to have the front notch similar to the e9 rails. I am sending a few sets to be blue zinc plated. they will be back in a few weeks if you still need a set.
  7. Ajay

    Sun Visor clip unobtainium

    I had the same issue after having my visors redone. The shaft was too thick to get into the clip (no pun intended). Was told to pull the visor clips out, 1 screw holding them in, then get a sharp razor blade and shave off evenly inside both sides evenly. After that they go back in perfectly. I...
  8. Ajay

    Needed a "Go By"

    Tom, The bottom of the rubber grommet has a 1 to 1.5" "finger tube" that goes thru (in my car) a rubber grommet Into the tranny tunnel. Looks like a rubber funnel.. Wish I snapped a pic before the install...
  9. Ajay

    Needed a "Go By"

    Tom, I just did this same process on mine. Here is what the grommet looks like.
  10. Ajay

    Gary's Avus Blau 3.0CS rebuild

    Gary, what I did with my factory sliders is I had them sand blasted then Blue Zinc plated. After they come back they look really nice. Throw some PB Blast in there and they work really nice and look brand new. Here is mine before I realized I needed new adapters.
  11. Ajay

    Gary's Avus Blau 3.0CS rebuild

    Those look nice...plus saves me hours of trying to fabricate them. Thanks Scott.
  12. Ajay

    Gary's Avus Blau 3.0CS rebuild

    Gary, first that is an awesome color. Probably one of my favorite colors I have seen on an e9. Would like to see your Scheel seat bracket that you used in your car. I am at the same point of installing my Scheels but need to fabricate a bracket. Found that the Scheel adapters mounted to the...
  13. Ajay

    FS random parts e9

    Letting go of some extra parts that have been refreshed: 1. Air filter housing powder coated (similar color to the factory brake lines---army green gray) plus zinc plated clips...would fit e9 or e3 $160 plus shipping 2. 4 slat Kidney which would fit either e9 or e3. Polished with most dings...
  14. Ajay

    Prep for 3.5 Megasquirt

    1 tube of the 4 oz was plenty for my set with a lot leftover.
  15. Ajay

    Prep for 3.5 Megasquirt

    Peter, I just did this process myself. Liquid Fusion as the previous post recommended. You can find it on amazon. Also when you apply it it looks very wet and gooey and you will think you messed up, but when it dries it dries clear in 24 hours or so. Super strong so set the lenses first. On one...
  16. Ajay

    FS: Tail Light Lens

    Thanks Scott. I will get some better pics when I move the car around. But Stan's lenses with freshly chromed housings came out real nice. To me, the red lenses makes my metallic silver paint "pop." Especially in the sun.
  17. Ajay

    FS: Tail Light Lens

    Stan's all red lenses on newly chromed housings. P.S. dont mock my faux rear fog light...the real one is on it's way :D
  18. Ajay

    Consensus on rebuilt calipers?

    In SoCal, Linco in Anaheim is good and Active Plating in Santa Ana is good. Active Plating recommends sand blasting parts prior to zinc, which adds to the cost, but the parts come back looking like new. Both do gold zinc and blue zinc (silver). Make sure your calipers are fully apart before...
  19. Ajay

    WTB - Pair of Zeniths in good operating order

    Hey Chris, I use Parts Reborn in Anaheim. Steve is the owner and does a great job. Mike P a mutual friend of ours also has tried them out and liked Steve's work as well. Another mutual friend of yours and mine mentioned Speedway in Santa Ana who also does a great job on the tumbling and ceramic...
  20. Ajay

    WTB - Pair of Zeniths in good operating order

    I have a set fully restored vapor blasted and rebuilt using the zenith rebuild kit with a set of intake manifolds vapor blasted as well.
Top