Search results

  1. deQuincey

    Wood steering wheel recommendations for my manual steering E9?

    My recomendation, better no wood, IMHO, E9 And a wood wheel, ….
  2. deQuincey

    Vintage Radio discussion questions

    Curious mixed feelings about design aspect and looks but good for you
  3. deQuincey

    Steering column U-Joints

    alberto, not sure which parts are these, always interesting to see
  4. deQuincey

    Zenith wizardry in TN/KY

    i am not in favour of this if you still keep the stock air filter it has a tube to connect that hoses to it
  5. deQuincey

    these germans !

    ....just before the w. k. m. says something inconvinient, let me clarify that this is to praise the germans, amazing guys ! i will be attending a business event/conference in this location side by side (glass divided) with some horses, classic ones too... together with the meilenwerk in...
  6. deQuincey

    What did you do to your E9 today?

    well, i use ultrasonic on the yellow bits and also in those elements that have nothing attached, i would not use on carbs because it moves the blocking bits (example in red arrows) that may become loose and because of residues i might be too old school, but i only use a mixture 50% petrol 50%...
  7. deQuincey

    Zenith wizardry in TN/KY

    Some knowledge https://e9coupe.com/forum/threads/lan-engine-m30b30-tuning-thread-steps-values-specs-and-so-on.35767/ Here also videos https://e9coupe.com/forum/threads/lan-my-renewed-engine-m30b30-running-in-process.44377/ worth a watch
  8. deQuincey

    Zenith wizardry in TN/KY

    do you have stock air filter ? If yes why Capp the hoses ? knurled screws are iddle screws do you know how synchro ? And tuning ?
  9. deQuincey

    Zenith wizardry in TN/KY

    Talking about different hoses, my think but essentially Is ok
  10. deQuincey

    Zenith wizardry in TN/KY

    Must connect to the air filter or capped post pictures, you might have a mess of biblical proportions
  11. deQuincey

    Zenith wizardry in TN/KY

    It should be completely closed no gap at all when you start the engine the vacuum produces the gap that is stated by the adjacent membrane and its limiting screw
  12. deQuincey

    What did you do to your E9 today?

    very aggresive y prefer hand clean for zamak
  13. deQuincey

    What did you do to your E9 today?

    I would not recommend that
  14. deQuincey

    What did you do to your E9 today?

    Got advantage of the better weather and went for a drive windows down
  15. deQuincey

    new integrated console for gauges and radio

    yes, thank you, i like the motometer ones series1 i checked back in the day and not available here + is the Fº and PSI thing,...not for me
  16. deQuincey

    new integrated console for gauges and radio

    a good point, Dave, but I prefer to see the wood as it gives a connection to the dash wood
  17. deQuincey

    new integrated console for gauges and radio

    So, final setting and aspect, my thinking, this is the best I have been able to integrate in the surrounding console and dash chromed rings would have been better, but,…this is life, almost
  18. deQuincey

    new integrated console for gauges and radio

    hi, i have 2 comments: IMHO, the result looks better if you can set the gauges panel inside the heater vent grille, not over it (orange arrow) and i see (blue arrows) that your wood is very high in the area, muts be 4cm lower, doing this you will have a great opening and space for objects
  19. deQuincey

    new integrated console for gauges and radio

    thank you Erik i never said it was an easy choice, that is why i appreciate it more... yes, right, there is a reason...to redesign as the car has been redone holistically, the interior too, then when installing the new dash+new consoles+new heater+.......the resulting width was less...
Top