Search results

  1. erneland

    WTB: Wiring harness for BMW E9 3.0CS

    Looking for a wiring harness in good shape. Preferably for 3.0CS 1973, but any wiring harness for E9 is interesting. Wiring harness for engine is not needed. I am located in Sweden. Br, Michael
  2. erneland

    My 1974 Inka S38B35 project

    Very interesting build to follow :). You don't happen to have the 3D-scans available anywhere? I'm looking at using a S54 in my E9, and the scan of the engine bay would help a lot :). Good luck with the build!
  3. erneland

    BMW 3.0CS --> Bat

    Progress is extremely slow, but I'm collecting parts right now. The build plan has taken some turns, and I will not widen the body as it stands now. Instead, it will be pretty much original on the outside. The full roll cage stays in, and I am now looking into the rear differential. What torque...
  4. erneland

    BMW 3.0CS --> Bat

    Today I managed to find time to open the "S0" diff... and it sure felt strong prior to opening it. I found that there was doubled up with clutch discs on both sides. So either someone have added the side gears or they've been there all the time. Anyway, nice to find another 3.45 LSD. I assume...
  5. erneland

    BMW 3.0CS --> Bat

    Weird thing happened today. I stumbled over yet another LSD sideloader. This time it's an unmarked one (again)... but with S0 inscribed on the housing (inside). First of all I checked that it was limited and it sure was. I tried to spin the inlet shaft and both output shaft spins the same way...
  6. erneland

    BMW 3.0CS --> Bat

    Long time between updates. I have another project car. A BMW E23 745 turbo that is completely rebuilt. Currently mounting the rear axle, trailing arms and all piping for brakes and fuel etc. Will be a very much upgraded turbo engine. M106 engine block with katalysator cylinder head. Same setup...
  7. erneland

    Gear stick knob question...

    Please check the diameter (outer and inner) plus length of the insert.
  8. erneland

    Gear stick knob question...

    I can email the file to you Markos ;)
  9. erneland

    Gear stick knob question...

    I have a STP-file (the insert in the gear knob) that can be 3D-printed. If you know anyone with a 3D-printer I can supply the drawing for free ;). Need to make sure that the dimensions are correct though.
  10. erneland

    BMW 3.0CS --> Bat

    I promise ;)
  11. erneland

    5 speed getrag tranny mounts FS

    Argh, didn't see this one until now. Let me know if you make more of them ;). Otherwise I'll fabricate one myself.
  12. erneland

    Wanted: CSI airbox - mounting bracket

    Hi James, Shouldn't you find a CSI airbox, let me know. I could possibly part with mine, since I won't be using it. :). Its located in Sweden.
  13. erneland

    BMW 3.0CS --> Bat

    Found this cool looking inlet manifold. It will be sitting on a M106 turbo engine in my E9 3.0 CS. :)
  14. erneland

    M106 in E9

    I might be interested of that too. ;). Let me check what I have. Price for gear box support and wastegate?
  15. erneland

    5 speed getrag tranny mounts FS

    sfdon, do you still sell those? /Michael
  16. erneland

    M106 in E9

    Thanks a lot for the quick answer! I check with him ;).
  17. erneland

    M106 in E9

    Is there anyone who has photos of M106 engine installed in a E9 body? I need to have an idea of where to massage the inner, right engine bay :). The car is about 24 hours from the engine, so I can't really check. Would appreciate all help I can get! I have googled, but have not seen any E9...
  18. erneland

    BMW 3.0CS --> Bat

    Project standing more or less still. But I'm working on the instrument cluster. I will use Arduino UNO in order to get the Vector to look a like instrument cluster, but the dash and housing be original. It will be 100% possible to put back the original instrument cluster ;). I'll 3D print a...
  19. erneland

    Sideloader LSD 3:45.

    I'm letting go of one of the sideloaders I have. It has 3:45 ratio. I'll include new friction discs. Can be shipped, but freight is not included. Edit -->Price: 1400EUR
  20. erneland

    BMW 3.0CS --> Bat

    It just happens to be, that I have 2 BMW Turbo steering wheels. What would one ask for one, if selling? It's a Petri marked 38.
Top