2800CS/E3 bav exhaust tips. New
- Thread starter nosmonkey
- Start date
I’ll take them. Pm sent.
Sold to the man above!
Now that's done...I also have a 55mm that I don't have a need for...will post in classifieds as soon as pics are done. $55 shipped CONTUS.
Let me check. Do i have first dibs?
Traded out...thanks, Stan.
stphers
Well-Known Member
Not trying to hijack a posting but it looks like everything has been sold I have a NOS tailpipe section in 55 mm available for sale
Thanks, Rick
Thanks, Rick
Go for it...I borrowed NOSMonkey's thread when he was done...
Now I cam across a thread that stated that the E3 were 55mm but I just measure my E3 with stock muffler and the tip is 60mm. If you all recall a box of tips, 55mm and 60mm were on ebay, NOS. The person that bought them sent a bunch as gifts to anyone who needed one. That's what I love about this forum. He actually sent me two, 60mm. One for the Bav and one for the E9.
Your tailpipe was swapped to the 60mm version I would assume.
E3 muffler is OEM at 60mm, E9 swapped to 55mm
So, anyone have a spare 60mm they can sell?
You'll have to check your OD (outside diameter) on the muffler/exiting pipe, as things may have been changed out, etc.
It’s defiantly 60mm. How do I know? I bought a 55mm and it’s too small. I just replaced the entire exhaust system in the fall, got it all from Maximillian, except the tip, which is/was back ordered. Apparently they had added the wrong tip to the order.
If the one at Wallontech is the same as other 60mm’s I think I’me fine. It’s just that it’s listed for a 3.0si and I wasn’t sure if there was some change for the later year cars. Thinking not, but thought I’d ask before I order (or see if someone has one before I pay 65% of the cost of the part for shipping). Thanks.
Some call it hijacking, I call it efficiency
So keeping with the hijacking theme..................my tailpipe is 55mm. I plan on removing it and cleaning it up since it is solid and NLA. I expect the exhaust ring between it and the rear muffler to crumble so want to be ready. Question is, is the exhaust ring 55mm or 60mm? 60mm may make sense since the ends of the pipes are flared. No 55mm part number in RealOEM.
I recently bought a new exhaust pipe tip pn 18111102632 55MM from Maximillian.
Here is what I learned today. The Fritz Bits tail pipe must be 56 or 57mm, my 60mm is way too big and the 55mm will not slip on.