driverside window off tract

Joe Barthlow

Well-Known Member
Messages
172
Reaction score
32
Location
Eugene, Oregon USA
I bumped my window off tract over the weekend in my 3.0si. It's an electric window. I cannot seem to get it to grab. Currently it's all the way up. if I go down, it falls loosely forward. Any tricks or tips appreciated. I'm hoping to do this without tearing the door apart, but will if necessary
 

Stevehose

Well-Known Member
Site Donor $$
Messages
12,981
Reaction score
5,652
Location
Sarasota, FL
Its not difficult to get to the regulator, unscrew the chrome arm rest cap from below, remove the 4 armrest screws, remove the black cover and screw from the door opening lever, and pull the door panel out from its holders on the perimeter. No need to remove the ash tray or the quarter window opening wheel
 

Joe Barthlow

Well-Known Member
Messages
172
Reaction score
32
Location
Eugene, Oregon USA
Its not difficult to get to the regulator, unscrew the chrome arm rest cap from below, remove the 4 armrest screws, remove the black cover and screw from the door opening lever, and pull the door panel out from its holders on the perimeter. No need to remove the ash tray or the quarter window opening wheel

thanks!
 
Top