E3 headers

[naccer]

I've posted a few times about the thermal reactors on my project 3.0Si. Decided to replace with these headers. If anyone needs a set they have them.

http://www.proverbialmotorsports.com/#!featured-items/c12cc

 

[afeustel]

Do they fit without hitting the frame rail and will they fit an e9 as well?

 

[BuzzBomb]

Those headers are meant for the e24/28 chassis. There was a report of idler arm interference in an e12. It will probably be the same situation as the e12 when considering them for an e3/9.

 

[naccer]

The headers fit fine, they do not rub the idler arm, as they don't really come down that far. One of them, I can't remember which is close to the body on the e3 and required some slight modification. After removing the reactors, I installed the headers which was relatively simple and had the car towed to the muffler shop where they connected them to the exhaust with some minor modifications including moving one of the heat shields. Took them 1.5 hours.