For Sale New E9 CS Coupe Tint Windshields $295! Sekurit Brand Now Discontinued

Discussion in 'Parts' started by ProSource Glass, Feb 23, 2019.

  1. ProSource Glass

    ProSource Glass Member

    Messages:
    77
    Likes Received:
    4
    Trophy Points:
    8
    Location:
    Andover, MA
    We still have several of the factory tint windshields Sekurit brand in stock for immediate shipment. This is the CS Coupe model glass. We are alerting all folks who are interested that Sekurit will not be importing this or most of the older glass that they still have tooling. We understand the US staff has been cut so this is not a priority unfortunately for us. We hope you will keep this in mind and plan to take advantage while there is stock available.
    Keep in mind we can ship more than 1 piece to the same location for about the same freight cost as 1. Truck freight ranges from $185-$240 within the continental USA. The windshields are the same price just $295 each.

     
    Drew Gregg likes this.
  2. Wes

    Wes Active Member Site Donor $

    Messages:
    570
    Likes Received:
    200
    Trophy Points:
    43
    Location:
    Tasmania, Australia
    You guys ship to Australia?
     
  3. ProSource Glass

    ProSource Glass Member

    Messages:
    77
    Likes Received:
    4
    Trophy Points:
    8
    Location:
    Andover, MA
    We will ship anywhere properly crated. But we do not have any freight forwarder so if you can make arrangements just email direct info @prosourceglassintl.com We will provide details. Thanks.
     
  4. Keshav

    Keshav Well-Known Member Site Donor

    Messages:
    1,341
    Likes Received:
    733
    Trophy Points:
    113
    Location:
    Weiterstadt, Germany
    Wes,
    Does your L have clear or tinted glass?
     
  5. Wes

    Wes Active Member Site Donor $

    Messages:
    570
    Likes Received:
    200
    Trophy Points:
    43
    Location:
    Tasmania, Australia
    Pretty sure it's got a light green tint.
    Not looking at it right now. Will be at the garage tomorrow.
    From memory W&N have a few different tint versions?
     
  6. Keshav

    Keshav Well-Known Member Site Donor

    Messages:
    1,341
    Likes Received:
    733
    Trophy Points:
    113
    Location:
    Weiterstadt, Germany
    Do they? Don’t think so....... just tint or clear! Take a look at their site
     
  7. Keshav

    Keshav Well-Known Member Site Donor

    Messages:
    1,341
    Likes Received:
    733
    Trophy Points:
    113
    Location:
    Weiterstadt, Germany
    The problem would be to match the current glass tint with the old originals. There I believe is a difference in tint.
    But the wind shields tint difference won’t effect the look as long as you aren’t mixing the rest with new glass.
     
  8. Frankie123

    Frankie123 Member Site Donor

    Messages:
    109
    Likes Received:
    23
    Trophy Points:
    18
    Location:
    Sydney Australia
    They have 2 options for the tint belt at the top of the screen (blue or green) as well as plain green tint and clear
     
  9. Wes

    Wes Active Member Site Donor $

    Messages:
    570
    Likes Received:
    200
    Trophy Points:
    43
    Location:
    Tasmania, Australia
    Could be wrong. Even happens to lawyers at times :)
     
  10. ProSource Glass

    ProSource Glass Member

    Messages:
    77
    Likes Received:
    4
    Trophy Points:
    8
    Location:
    Andover, MA
    It states green tint which means these are not clear and do not have the top green shade band which i m guessing was stock back then. I do know the quality is very good not like the Chinese. They are standard light green tint throughout. Sekurit brand is good while they last. i think we are not able to get again, no one knows for quite sure.

    There is no blue shaded band unless an aftermarket company decides to offer that way. All the OEM glass is green tint standard for BMW, Porsche, Audi and Mercedes.
    If you would like tom order nd need freight specifics please email us at info@prosourceglassintl.com. Thanks Richard
     
  11. ProSource Glass

    ProSource Glass Member

    Messages:
    77
    Likes Received:
    4
    Trophy Points:
    8
    Location:
    Andover, MA
    By the way i read the concerns about matching tints which is very minimal since Sekurit made the old glass and now makes the new the quality control on things like that no one evr complains. They get it down right and have their old production upgraded to new.
     
  12. Peter Coomaraswamy

    Peter Coomaraswamy Well-Known Member Site Donor $

    View My Showcase
    Messages:
    3,357
    Likes Received:
    491
    Trophy Points:
    83
    Location:
    Austin, TX
    About 10 minutes ago I installed a new windscreen from these folks (I believe) it's a SEKURIT screen made in Finland. The fit was perfect and I had no issues whatsoever installing it, which included banging the snot out of the sides and corners to get the seal to seat correctly. I also noticed that the weight is significantly lighter than the stock BMW branded glass I removed. My original windscreen was fine except it had some wavy-ness to it and was pitted from about 100K miles of driving and I believe most of that was in desert areas where there was allot of sand about. Anyhow, I'm very pleased and the tint is pretty much the same as the original I think. I can't be 100% sure because I think the tint probably aged quite a bit over 40+ years. Anyhow, here is a shot
     

    Attached Files:

    DWMBMW likes this.
  13. DWMBMW

    DWMBMW Well-Known Member Site Donor

    Messages:
    489
    Likes Received:
    276
    Trophy Points:
    63
    Location:
    Miami, Florida
    I plan on ordering one. Anyone else in the South Florida Miami area want to share on shipping costs?

    Doug
     
  14. ProSource Glass

    ProSource Glass Member

    Messages:
    77
    Likes Received:
    4
    Trophy Points:
    8
    Location:
    Andover, MA
    Glad it was top quality and fit. I have been saying for years that they have a proven track record. They are the exact glass that BMW utilizes except for the logo and trademark stampings on the glass. Since BMW does not make glass we might as well use the product they decide. Thanks for the feedback!
     
  15. autokunst

    autokunst Well-Known Member Site Donor $$

    Messages:
    1,834
    Likes Received:
    805
    Trophy Points:
    113
    Location:
    Milwaukee, WI
    Id be interested if a few of us in the Midwest could combine on shipping.
     
  16. ProSource Glass

    ProSource Glass Member

    Messages:
    77
    Likes Received:
    4
    Trophy Points:
    8
    Location:
    Andover, MA
    Doug just a heads up. It runs $220 freight to a business address in Miami. It is the same rate for 2 or 3 or 4- all fit in the same crate. Just let me know and we can wait til the end of the week. It is worthwhile for someone in south or central FL to take a ride down to pick it up.
    We will probably sell out by the end of the summer not sure of future availability. The truck freight to mIdwest is $215 whether you purchase 1 or a few- based on commercial delivery.
     
  17. Peter Coomaraswamy

    Peter Coomaraswamy Well-Known Member Site Donor $

    View My Showcase
    Messages:
    3,357
    Likes Received:
    491
    Trophy Points:
    83
    Location:
    Austin, TX
    BTW, That's the way Ian and I purchased ours, we bought two- his is still in my warehouse.
     
  18. autokunst

    autokunst Well-Known Member Site Donor $$

    Messages:
    1,834
    Likes Received:
    805
    Trophy Points:
    113
    Location:
    Milwaukee, WI
    I am optimistic - there are several of us in Wisconsin, a handful in Chicago, northern Indiana - seems like a group order could assemble. :)
     
  19. ProSource Glass

    ProSource Glass Member

    Messages:
    77
    Likes Received:
    4
    Trophy Points:
    8
    Location:
    Andover, MA
    I will say that the rate is best to Chicago, we can get it down to $210 rounded off so ideally if we were to put 5 pieces together in 1 crate it runs $42/ a piece for freight we would not charge crate fee for those many just please let me know best to email direct at info@prosourceglassintl.com It is easiest to reply in the evenings otherwise just provide details, I may not be available part of the days. We hhave a good Sekurit crate for a few pieces.
     
  20. WALTER

    WALTER Active Member Site Donor

    Messages:
    488
    Likes Received:
    61
    Trophy Points:
    28
    Location:
    WASHINGTON, D. C.
    Anyone in the Mid-Atlantic interested in splitting the shipping? I'm in Virginia Beach, VA.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice