Hi there,
In prep for a auto to 265/5 spd conversion, I removed the auto tranny wiring harness; I traced it back to the dashboard and unplugged. Following advice by many on related forums on wiring the reverse lights for a manual, I isolated the blue/white and purple/black wires referred to and labelled.
When I was tracing, I found some orphan wiring. One is a large circular connector that was beside the left side of the steering column and the other was a lil green patch wire (neither end was connected). Please let me know what these might be for?
When I was in there, I also removed the factory speaker and its wiring.
Kindest regards,
Bill
In prep for a auto to 265/5 spd conversion, I removed the auto tranny wiring harness; I traced it back to the dashboard and unplugged. Following advice by many on related forums on wiring the reverse lights for a manual, I isolated the blue/white and purple/black wires referred to and labelled.
When I was tracing, I found some orphan wiring. One is a large circular connector that was beside the left side of the steering column and the other was a lil green patch wire (neither end was connected). Please let me know what these might be for?
When I was in there, I also removed the factory speaker and its wiring.
Kindest regards,
Bill
Last edited: