Three piece wheels - help wanted - suggestions, suppliers or wheels - Group 4 project

Tim Parker

Member
Messages
25
Reaction score
1
Location
West Hartford, CT
Hi. So I'm at the point where I've got my fenders on and can measure up. But now I've hit the wheel issue. I thought I was going to be able to use my BBS RS faces and add new lips and barrels but now I think I hit a wall. Waiting to hear back from VR Wheels who are talking about using barrel as lips and vice versa.
I need to create 11 x 17 inch wide rears with zero offset (5.5 lip and 5.5 barrel) and 9 x 17 fronts with negative 1" offset. (5.5 lip and 3.5 barrel).
Anyone with wheels / advice / vendors greatly appreciated.
 

Gary Knox

E9 Member Emeritus
Site Donor $$
Messages
1,821
Reaction score
743
Location
West Chester, Pennsylvania
Tim,

I have a set of 9" X 16" Weds that are in excellent condition - just too wide to use on my stock e9. IF you have any interest, I can get you pix and dimensions, etc.

Gary
 

Ajay

Well-Known Member
Site Donor $$
Messages
235
Reaction score
170
Location
Irvine, CA
I agree with Ian, srrhardware is the way to go. Reasonably priced and good quality. I ordered a set if 17" BBS RS lips and they came home perfect and ready to install out of the box.
 

teahead

aka "Rob"
Site Donor $
Messages
6,392
Reaction score
1,848
Location
Tacoma, WA, USA
Had some good luck with these guys:

 

rsporsche

Moderator
Site Donor $$
Messages
10,682
Reaction score
3,711
Location
Atlanta, GA
Paul Ehrlich - Ehrlich Wheel Works
 
Top