What is the outer diameter of the Sanden 508 stock pulley?

[Bmachine]

Trying to debug a problem on my end here. Would anyone be kind enough to measure the size of those pulleys? Mine was replaced from stock and measures about 152 mm. I’m talking about the overall outer width of that pulley.

Thank you

Bo

 

[Stevehose]

Do you still need this? I can measure later if so

 

[Bmachine]

Yes please. Thank you Steve.

 

[Stevehose]

So you want the total OD including the walls of the pulley or measured at the depth of the pulley or the nose piece?

 

[Bmachine]

Hi Steve. Yes, as I mentioned in the original post, “I’m talking about the overall outer width of that pulley”

 

[jefflit]

I get 135mm

 

[Stevehose]

I'm waiting for a battery to arrive today for my gauge and will do same

 

[Bmachine]

I get 135mm

Super helpful. Thank you Jeff.
So, as I suspected the pulley that was installed on my compressor is way too large at 152mm. No wonder it was cutting into the radiator hose.

 

[Stevehose]

Mine is 125 mm

 

[Bmachine]

Thank you Steve.