QtheGenius
Member
- Messages
- 35
- Reaction score
- 3
Looking to buy the base that goes under the badge that goes on the hood.
BMW part number 51-14-5-780-170
BMW part number 51-14-5-780-170
WTB Hood Emblem Base
- Thread starter QtheGenius
- Start date
Have you checked with La Jo.... Oh nevermind 
steve in reno
Well-Known Member
I think that is the rear deck base for mount on the curve area of the trunk.
It has a scallop, not flat.
It has a scallop, not flat.
Agreed.
E9 hood (bonnet) emblem – support ring
I have seen two versions of the item, which are visually very similar. The first original version was chrome plated and the second was a light alloy version.
I’m not sure if the lighter version was an E9 part but its dimensions are so similar that I suspect it was.
Both measure 90mm in diameter with an internal diameter of 84mm. Their internal diameter matches that of the curved base for the trunk (boot) unit.
Their profiles are marginally different – the original stands 6mm high and the alloy one is 5mm high. The edge profile of the chromed unit is a sharp angled profile whereas the alloy one is a gentler curve.
The original weighs 24 gms but the alloy version weighs only 9 gms.
On my car the original hood emblem was numbered 00095808114 and the trunk emblem was numbered 1811992.4. Both emblems measure 83mm in diameter.
I have not seen any NOS 1811992.4s for sale but some 00095808114s are still around and fit both the front and rear chrome rings perfectly. The external diameter of the later 0095808114 emblems is also 83mm.
Marco
I have seen two versions of the item, which are visually very similar. The first original version was chrome plated and the second was a light alloy version.
I’m not sure if the lighter version was an E9 part but its dimensions are so similar that I suspect it was.
Both measure 90mm in diameter with an internal diameter of 84mm. Their internal diameter matches that of the curved base for the trunk (boot) unit.
Their profiles are marginally different – the original stands 6mm high and the alloy one is 5mm high. The edge profile of the chromed unit is a sharp angled profile whereas the alloy one is a gentler curve.
The original weighs 24 gms but the alloy version weighs only 9 gms.
On my car the original hood emblem was numbered 00095808114 and the trunk emblem was numbered 1811992.4. Both emblems measure 83mm in diameter.
I have not seen any NOS 1811992.4s for sale but some 00095808114s are still around and fit both the front and rear chrome rings perfectly. The external diameter of the later 0095808114 emblems is also 83mm.
Marco
Attachments
Last edited:
I think I have a brand new one at home, will check when i get back.
Got one here still in the packet.
No idea what it's worth, make me an offer. Shipping will be about $10-15
No idea what it's worth, make me an offer. Shipping will be about $10-15
reedreed
Well-Known Member
I'm looking for this part as well.
I have one, need to find it PM me
FYI, the newer ones Jaymic sells/sold have the integral front ring. The front & rear bases would be excellent parts to 3D print, which I am able to facilitate if interested. Just need to borrow a front base ring to send to the scan tech in Connecticut. We have several parts in process.
reedreed
Well-Known Member
I'm looking for this part.
reedreed
Well-Known Member
Still looking for. May be there is someone who has one for sale?
Please be patient. We are working on remanufacturing these & the rear base as well.
One from eBay (not my business no responsibility...)
Alu Emblem Motorhaube BMW E9 3.0 CSL CSI 2800 2.5 CS 2000C hood roundel raised | eBay
Entdecken Sie Alu Emblem Motorhaube BMW E9 3.0 CSL CSI 2800 2.5 CS 2000C hood roundel raised in der großen Auswahl bei eBay. Kostenlose Lieferung für viele Artikel!
www.ebay.de
“May Not Ship to United States of America - Read item description or contact seller for information on shipping options.”
PM sent