I'm planning to install Camber and Caster plates on the rear axle.
There seems to be two variants as pictured below, any experience/preference of which is best would be appreciated.
I have a lot of difficulty with the version on the right getting them to hold position. The through bolts and grooves are not robust enough to deal with the forces involved.
E9 AND E10 ADJUSTABLE REAR SUBFRAME EXCHANGE PROGRAM The stock E9/E10 rear subframes does not allow you to align the rear wheels. This problem carried onto future subframes like the E28 and the E30. Alignment is a critical point in how your car handles and wears tires. Especially important in...
www.garagistic.com
Is this a track specific kit , or of benefit to the average setup?
There is a small benefit from additional negative camber in the rear, but your tires will wear much more quickly. And as I noted, the setup I used was unreliable.
I wouldn't recommend changing this. Spend the money on tires.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.