E3 m106 project questions.

[73bav]

Hello community, I recently took the plunge and bought a m106 engine along with most of the components such as: k27 turbo with gt35 turbine, charge pipes, exhaust manifold, wastegate, intercooler, new injectors, etc. I'll be mating this to 265/6 that I obtained a recently as well. My concerns are if the oil pan will clear the subframe? Will the intake manifold clear the brake booster or will a tii booster be needed? I will be running mega squirt and was curious if a base map exists?

Any help or pointers would be appreciated.

 

[sfdon]

Use an 528i style intake
MS comes with a base map for Forced induction
Try for 10 degrees of retard at boost until you get to the dyno

 

[73bav]

Thanks Don, have you done this swap before? I do have a brake booster for a tii but wanted to save that for a future project. The intake manifold you are referring to is from an e12? As for the base map I can obtain a m30m35 base map from my friend and stay out of boost to get to the dyno. I was just curious if such a map was already created.