Search results

Perfect, thanks for posting Don!

If it is what it looks like, the hood is touching the insulation on the right side, never a good sign.

No worries Dick, just a heads up to anyone looking.

But these aren't "the" CoupeKing reproduction wheels, as can be seen on the extra step between the center and the lip + the spokes meet the lip differently, they are repruduction wheels but from another manufacturer and less desirable because you can easily see they are reproduction wheels. And...

Great job on catching that scam ad yesterday, both @Wladek and @Christopher in separate threads. I understand the need to remove the threads but it could be very educational to show what's possible (fairly easy) with help of AI. If it's okay, I'll post the original picture posted by @JohnP_02...

Great to hear Barry! I did mine last weekend as well, injector no.1 was pretty badly stuck but got it out with a pneumatic extractor tool. My vent pipe broke too ;)

Great! Yes a cheap injector bore-cleaning set is nice to have in case there are some rust and dirt, there are specific plugs you can buy to prevent dirt from falling into the cylinder, but an M6 bolt and a suitable washer also stops dirt while you clean the walls of the bore, then use a vacuum...

Also Barry, have you considered replacing the valve cover as well? They're plastic so they're prone to cracking and warping. It's not a huge expense, so while all injectors are out (if they come out.. do you have an injector puller of some kind if they're stuck?) it's worth considering replacing...

I'm about to replace the valve cover + gasket on my F11 with a N57 as well, and what I've read is that it should be fine without the computer, but I'm not sure. I have a computer with ISTA so I'm fine either way. Could throw some codes on low fuel rail pressure, but don't think it would prevent...

Here you have the part # for the bolts that you need, and what I had to do to fit the thinner (and much better) guibo. https://e9coupe.com/forum/threads/getting-this-3-0csi-back-on-the-road.16997/page-18#post-283703

For some reason I didn't get a notification, but yes, they're still for sale, I'll send you a PM. EDIT: These are now SOLD!

I have the DIY version of this kit, and I have no doubt halboyles kit is even tighter, so here's a video that demonstrates how firm your rod can be if choose to go for it:

I once had a Honda Monkey as well, how I wish I didn't sell it. (picture isn't great, but it's the only one I have)

Pending

SOLD Hi guys, I bought this set from @Wladek back in 2019. Plans have changed so I won't need these anymore. Not looking to make any money, so I'd like to get 300€ + shipping. SOLD Wladek had great photos and info in his FS thread, so here's the link...

SOLD! For sale is one complete set of taillight lenses, bought from Stan a couple of years ago. New, only opened up to take photos. SOLD! Price: 390€ + shipping (within Europe ~25€) SOLD!

SOLD Brand new, only opened to take photos, 2pcs of windsplitters. Price: 100€ + shipping SOLD

Hmm, I was sure one end was reverse threaded, but now I had to run out and double check, and it isn't! I have another brace (for another car) and that one is reverse threaded. My bad!

SOLD

Yes, one end is reverse threaded, untighten the lock-nuts, spin the bar to tension.