Search results

Got some sparkage, thass fer sherr. "Bondo gives 'er character" "Good ideer to roll this-here winder down" so you have an escape route when the gas can tips over, oh weight he's strapped 'er dern. And first thing, he goes rallying! Gotta love it! But don't wanna mess up the field too...

Fjiord for me, I love that little hint of lavender in it. In person I've seen red, white, Atlantik, malaga, gold... I have Baikal but very faded/sunbaked. Baikal was nice and deep but we get too much UV for it to last, at least in whatever two-stage the PO used.

It's downright criminal that anyone's inner fenders be that bright, clean and shiny. AMHIK...

Way, back Art and Marilyn got their (his or hers I don't remember) into an Italian car show, are at least an event which that time featured Italian cars, by demonstrating that early coupe drawings were the product of one Mr. Michelotti who as it turns out did other early Bimmers as well (700...

L-jet parts? From bimmers (and others) only 40 years old instead of 50-year old D-Jet? There are certainly many modern systems that are likely easier to acquire, more adaptable to modifications, and enabled for easier troubleshooting. But some must hang on the hook of authenticity... I have a...

#1 too low especially in back #2 a bit high up front that leaves #3, though I'd be concerned when turning into driveways

On my seldom-driven car, the first twist of the key after a week or two of sitting is usually met with a "click" as if the battery was only strong enough to actuate the solenoid and not spin the starter. Or maybe the ring and pinion were contacting but not engaging (I doubt this, but it's not...

Many years ago I extended my (slicktop) drains through the rockers using some plastic tubing. Now that I think of it, lacking a sunroof, where did those tube drains originate?

Steele Rubber is great. I have their catalog from some 20 years ago.

It can happen with automatic trans that if parked with a stress on the driven wheels (such as on a slope) that the trans (and sometimes the steering, and ignition cylinder) will lock, especially if the wheels are fully right or left. Solution is to block the front wheels and lift the rear so...

naaah, 1772 cars didn't have sunroofs.. J/K

A friend had a 735i with a bad head gasket, parked it for 7 years IIRC, then gave me about 12 gallons of fuel. After siphoning it through a tiny little filter, it worked in my lawnmower and I poured it through my K100RS Beemer with no ill effects. We have ambient temps in the 80s for much of...

I'm nobody's carb guru, but one thing I learned while driving a friend's 2002 that would stay at any idle I set, although it ran pretty well otherwise....is the following. Weber carbs have pot metal bodies. Prolly most or all carbs do, but let's keep this local. Nothing wrong with that...

seems to me I read somewhere, decades ago, that one could test your coolant by putting one probe of a multimeter (set to DC volts) in the coolant, the other on a ground. The voltage measured would inform how "good" the coolant was at preventing electrolysis. But that was then, and this is now...

It's a trick to get the position of the bolts/mounts on the inner fender tops in ....just.... the right position, BTDT! Too far one way and they don't hold the hood up, too far the other way and the elbow hits the fender top before the hood is completely closed (you may risk damaging the hood...

Nice video but I think our 3.0CSLs were the first M cars... although prepared by tuners at first. The M1 is nice, but it (to me) never represented a "BMW design" and there has been nothing like it since. OTOH there were several other cars of the day, and previously, which used the same or...

I'm not much impressed. As a "stated value" policy issuer, Hagerty will accept the risk that an insured vehicle won't be wrecked while under their policy, if you pay the premiums due. They're in it for the money and know the risk level they're accepting when they issue the policy, and what the...

If you take out most or all of the spark plugs, rotating the engine to set the valve clearances will be a lot easier. My long-gone 2002 (or several) had a ticking noise despite repeated efforts to set the valves. An old-time dealer tech told me something about the rockers sliding on the rocker...

Aaaaand... Autokunst takes it! i gotta put up more little CS cherries. Actually when I hot wired it to establish that it worked, it sounded like a little panzergrinding it's way along a rocky road. J/K, but it wasn't silent with the occasional clunk when the weight that drives the movement...

see photos, you pay shipping from Honolulu 96816. Verified working last week. Charlie 808-391-0787 be aware of the time difference, I'm in Hawaiian Standard Time and will be grumpy if/when you call outside those hours. Not to say I'm on Hawaiian Time ;) TIA