Search results for query: 635csi

The one on my 635csi does not have a hole. Haven't climbed under my coupe to see if that one has a hole, but I know I did not put safety wire on it when I installed it.

Perhaps he means a 1997 E31 engine -- an S70B56 maybe? :^)

...is that the bolt fits into a groove and only needs to be tight enough to keep the cable from coming out. I just looked at this on my 635csi barn find. Your leak is coming either from the o ring for the speedo drive, or the shaft seal inside the speedo drive unit. Replace the o-ring...

A 97 635csi should be worth some good money.

This is maddening @aearch. There are four different motors used in 635csi. If your friend has a $600 car for you, I can only presume it is a US M30B34. This is the least desirable of the four, and the one motor that everyone advised not to get. You can get a running B35 for $1,500 or less. If...

hey markos. thanks for steppin in. so i have a friend that has the 635csi for 600 so it seems a good place to start. its running so thats ok. so markos what ya think - rebuilding an engine aint that much i have a fantastic machine shop -old school since 1952 perfect work and cheap- worst case...

Nice...looks like a lot of JDM wheels, which is cool. I used to own a little Toyota Corolla "peanut." Fun little car to take auto-crossing. If you didn't know they were wheels, some of them look like they could be fly fishing reels. Some don't even look like wheels if you didn't know you were...

Not mine, I know nothing.. https://m.facebook.com/marketplace/item/675611567671244/

...in this obscure corner of the internet. I discovered it while reading about the E24 "Observer" coupe (https://drives.today/articles/1293/history/concept/1982-bmw-observer-coup-unique-glass-roofed-635csi-e24.html) and wanted to know what style wheels are those. It's all just so zany. I love it.

Alan, We have recommended several times that the following cars have the b35 motor with Motronic 1.3 to keep things simple: e24 635CSi 88-89 e32 735i 86-92 e34 535i 87-92

BMW M90 Engine from 1980 635csi 3.5 L Can palletise and ship globally at buyers cost. Postage depending on location please get in touch Collection from Woking Surrey UK also fine. Heads, pistons, rods, chain covers, other bits n pieces also available pls get in touch Block £700 Head £200...

Greetings TomHom and welcome to the forum. I've been into my e9 for almost ten years now, and recently acquired a 1979 635csi (which sat idle for ten years and needs a ton of work).

...with the installation i surely would be able to this myself -yet it makes a lot of since to me to have someone with all the experience to get it running and tuned. http://davidsclassiccars.com/bmw/275419-1984-euro-e24-635csi-m30b34-big-six-engine.html going to call them monday to get the...

...THE HARD SOLUTION -the s38 is down the road it has been sold and the money is in my pocket so to say now i have an offer for a b34m30 from a 635csi for 500.00 i surely dont mind building my own motor again as ive done scores of them i have easy access to a machine shop very close by with...

...some parts that may work, but haven't pulled the trigger yet. We have some other ideas too. Also we've been distracted by our barn find 79 635csi. Fuel, ignition and most of the electrical system are sorted (thanks for the replacement brain), windows now work, brakes are mostly sorted...

...as Rob noted, there are a number of coupe owners who have gone to the stock M30b35 engine. Specifically, the engine from a 87-92 735 or 88-89 635CSi, 87-92 e34, all using Motronic 1.3. This not as sexy as some of the alternatives you are considering, but it is a straight forward swap, any...

...Driven for ~100km, fitted for about 6 months. £70. Small bit of surface rust at one end of one spring. Nr 0001311042 Starter motor from 635csi. Works, but possibly faulty. Removed when our car had some intermittent starting issues. Can't remember if it was the starter or otherwise. £30 +...

As to your injector seal question, I am attempting to resurrect a Euro 635csi that had been sitting for a decade and I replaced all of those seals on all of the injectors (as well as the hoses to the injectors.) Seals were cheap on Rock Auto - Beck/Arnley 1580021. Kit contains 4 seals for...

it can not be LSD for 230 ? do you believe that

Hi all. I've had an email using this old advert title from a person going by the name of Goodwill fred offering me a complete mint LSD from a 635csi e24 for 230 dollars. For me, this is a bit random, plus they have included a pic of said diff. Has anyone seen had the same email?