Search results for query: weber

Do webers and Solex's use the same manifolds Thanks David

For sale: 3 Weber 40 DCOE side draft carburetors with Alpina intake plenum. Set comes with Weber intake manifold, BMW air filter, gaskets and linkage (see attached photos). $3000.00.

Anyone know what size these threads are? I assumed they were pipe threads, but they are not 1/4 or 3/8th NPT. This is the vacuum source for the brake booster, right?

Hey everyone, I’m in the process of buying a set of triple Weber 40 DCOE carburetors from another member here on the forum to replace my current dual Weber 32/36 setup on my E3 bavaria. I’d love to get some advice from those who have done this swap before. Aside from the carburetors themselves...

Offering a set of three 40 Weber DCOE 151s, made in Spain, with the air correctors for each throat that make balancing much easier. All three have a part number 329 09 on them. I pulled these from my car eight years ago, and in transition swapped some of the calibrated parts. All the calibrated...

Up for grabs is the Weber set up with manifolds and linkage accessories etc. etc. that were removed for an injection conversion. Also a steering wheel and front windshield seal for an E3 as well. First time posting anything for sale so I guess I can just take offers.?

The vacuum port on the base of the carburetor does not provide manifold or ported vacuum. What source of vacuum do you all use for the distributor vacuum advance? Thanks, Douglas

So my engine came back from Korman with a new set of Weber DGAVs. Paperwork states 135 main (no mention of secondary). 45 / 60 idle jets - this I have verified physically. 170 air… assuming they are talking emulsion tubes? Maybe it’s the secondary. Have not got in there yet I cannot get a...

Hello, Is anyone running the Tii booster in their E9? I understand the linkage/rod needs to be modified to connect onto the brake pedal. What about the brake lines? The Tii brake booster is about 2" longer than the booster in my 2800CS, just curious if they can be rerouted/softly bent into...

I was reading about Triple Weber tuning. Here's a nice reference with lots of photos: https://240260280.com/Tech/Carbs/Weber/DCOE%20Theory%20Operation%20and%20Tuning.html

...Hello ALL / sincere best ProActive Healthy wishes and with zero or minimal car issues too (wink & smile) So, anyone out there need/want a Weber Carb ? was working fine and was in my 69e3-2800 when i purchased car 2years ago and since then, have removed and replaced with new Dual Webers. I...

Looking for some advice on the issue below: I have fuel visibly pouring out of the venturi on the choke side of my front carb (only on one side) when the engine is off of idle (at idle the issue doesn't occur). Meaning the throttle is increased slightly or even significantly, I can see the...

An older gentleman I know has had these Weber 45 DCOE carbs for sixty years in his garage, he is a Ferrari and MG collector and is battling cancer for the second time. I offered to post them here for him. They will need to be rebuilt obviously and they are a set of three matching carbs. First...

I have 32/36 Webers on my 71 2800 CS and am having difficulty getting them to adjust. I rebuilt them a while back and the car runs OK, however the Oxygen sensor numbers are very high (18 to 20) and I cannot get them down. The fuel mixture adjustment screw doesn't seem to do anything. All gaskets...

I've recently converted to weber carburetors and have noticed an indentation from the air box in the foam hood liner. From the pictures attached, can the "black spacer" be swapped out with something smaller in height. Any other solutions one may have. Thanks

Sure sounds nice.

Hello Coupe Owners, I am looking to buy a VGS-brand intake manifold for installing Weber DCOE carbs on an M30. I understand these manifolds are not easy to come by, but try not to leave any stone unturned when searching for period-correct tuner parts. This specific design raises the carbs above...

Howdy all - Finally have some time to get back on resto of 74 3.0. It has dual Type 32 Webers and I’ve added a strut tower bar that precludes me from using the original housing w/o modification and I don’t want to alter it. Searched threads but didn’t find model numbers. Is there a K&N...

I have had these in my tool box for close to 45 years, time to let them go. These are dealer swag from back in the day. All three items are from Weber Motors, one of the first dealers in the SF Bay Area. I worked there as a mechanic from 1972 until 1986. The cigarette lighter is made by Barlow...

https://www.classix.se/cars-for-sale/271-bmw-3-0-csl-p-o-r