I would like to know what model BMWs had a 10/11mm open end spanner?
Thanks in advance.
Koopman
Thanks in advance.
Koopman
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
10mm /11mm open end wrench?
- Thread starter Koopman
- Start date
BMW's part number is 71-11-1103-078. Looks like it is still available - ECS Tuning is selling for $12.60. Here is a link to realoem.com that lists the model it was available for. http://www.realoem.com/bmw/enUS/par...320i&mg=71&sg=05&diagId=71_0171&q=71111103078
ThanksBMW's part number is 71-11-1103-078. Looks like it is still available - ECS Tuning is selling for $12.60. Here is a link to realoem.com that lists the model it was available for. http://www.realoem.com/bmw/enUS/par...320i&mg=71&sg=05&diagId=71_0171&q=71111103078
Those wrenches, because of the writing stamped into the shanks, are not the same as originals.They, at the very least should have made in West Germany as well as chrome vanadium stamped into them. The new tools being sold by BMW and ECS , again,are not the same except for wrench sizes. The large water pump pliers are correct. All of this adds to why original tools don't come cheap.