84E24
Well-Known Member
In 09/2010 I purchased Eric Petterson's M90 motor after his 84' e24 was totaled. He had just finished a Inspection II service. My intent was to clean up, paint, service and install into my 73' 3.0cs.
I have pulled the head off and verifyed that it is indeed a 84mm stroke, the top of the pistons are stamped 93.35. I have removed the oil pan, throttle body and valve cover to blast and clean. All other parts still need to be re-worked. The head had a 3 angle valve job 10k miles ago. The only half way down side is the who ever pulled the motor for Eric cut the harness at the ECU.
Here is a link to look at what I have: https://picasaweb.google.com/steve.blingham
I know that shipping a motor is expensive so, I would be willing to transport the motor 200 miles in a radius from Dayton, Ohio 45414 to help out.
I am looking for $750.00 us.
Any questions give a call ( 937 681 3676 ) or email.
Steve Bingham
I have pulled the head off and verifyed that it is indeed a 84mm stroke, the top of the pistons are stamped 93.35. I have removed the oil pan, throttle body and valve cover to blast and clean. All other parts still need to be re-worked. The head had a 3 angle valve job 10k miles ago. The only half way down side is the who ever pulled the motor for Eric cut the harness at the ECU.
Here is a link to look at what I have: https://picasaweb.google.com/steve.blingham
I know that shipping a motor is expensive so, I would be willing to transport the motor 200 miles in a radius from Dayton, Ohio 45414 to help out.
I am looking for $750.00 us.
Any questions give a call ( 937 681 3676 ) or email.
Steve Bingham