Adjustable Upper Strut mounts

[aguirola]

Hi friends,

I am trying to locate a set, can be used, but not beat, to add a bit of adjustability in the front wheel alignment,

i.e neg. camber. Not for racing, more street, a touch of oversteer.

Appreciate all advice.
Best,

Alberto

 

[rsporsche]

Alberto,

search is your friend here. check out the post from @adawil2002 and the K-Mac units that VSR installed on his coupe <post #5>.

WTB camber plates

I bought the lowering kit from La Jolla independent and had it installed on my 72 CSi which resulted in excess tire wear on the inside tread. My mechanic is recommending camber plates but his normal supply sources are all saying they don’t have them in stock. Any suggestions?

e9coupe.com

 

[aguirola]

I have looked around, but still confused
found these, but possibly over the top...

https://groundcontrolstore.com/products/bmw-e9-e10-top-mount-camber-caster-plate-bmw-2002-etc-pair

So, I think K-Mac units are the best option?

Thank you.

Regards,
Alberto

 

[rsporsche]

the ground control units are only for 2.5" springs (as i remember), the K-Macs work with standard springs

 

[aguirola]

I think mine are standards. Will take a look.

 

[rsporsche]

unless you have coilovers, you have the standard springs (approx. 4" diameter)

 

[aguirola]

Then I have the Std.

 

[aguirola]

I guess for the install, I have to remove the struts, even if the engine is out?

 

[rsporsche]

you at least have to drop the struts and lower the subframe - easier if the engine is out

 

[aguirola]

Thank you.
Can I install the whole front assy, with engine and tranny?