Benny and the Jets

[RIQUE]

Hi ya folks, I have managed to overcome my carb problems and have been sporting a big smile all day. I need to purchase zenith jets to finish my fine tuning. Can I get recommendations where I can get air jets for zenith carbs? aside from La Jolla. Thanks, Enrique

 

[velocewest]

You might try Jim at Mesa Performance. I bought my last Zenith rebuild kits from him.

[email protected]

 

[gazzol]

Hi ya folks, I have managed to overcome my carb problems and have been sporting a big smile all day. I need to purchase zenith jets to finish my fine tuning. Can I get recommendations where I can get air jets for zenith carbs? aside from La Jolla. Thanks, Enrique

Well done what was the problem in the end?

 

[blumax]

Zenith rebuild kits and jets--

try the below----they are importers of Zenith kits--the owner of Royze, John Lazenby is a very good friend of the E-9 group here in Orange County--his love affair with the Roundel goes back to 1966 when he drove the new cars from the Port of Long Beach to one of the original "Dealers"--Schneider Motors in Anaheim--give him a try--

www.royze.com
[email protected]

 

[RIQUE]

Gazzol, my carbs had the following problems

1. Choke flaps on each carb had different settings
2. Linkage lengths were not set correctly
3. Main jets specially on 1st stage were to high for my altitiude
4. Accelerator pump seals were worn uneven on carbs thus different
discharge volume
5. Accelerator pump nozzle not well aligned on carb 2.
6. Last problem still to be solved...air jets to small..

Regards, Enrique