Can someone with a CSi measure the badge location?

[thehackmechanic]

Can someone with a CSi do me a favor and measure how far the "i" in CSi is from the right edge of the trunk lid? My name badges haven't been on the back of the car since the body restoration was done in '88, and the guy who did it ground off the rust and filled in the holes. I need to put them on with double-sided tape and want them in the right place.

Thanks.

--Rob

 

[Aurelius]

Rob,

since nobody else seems to be responding and I don't have a CSi myself to take measurements off (only CS), maybe this posting on the German E9 forum will be of help: http://www.bmw-cscoupe.com/forum/showentry.php?sNo=12188

According to this, the distance to the right edge of the trunk lid should be 25 mm, which should come out to almost exactly one inch. I cannot vouch for this information, though.

Aurel

 

[Stefan]

Can someone with a CSi do me a favor and measure how far the "i" in CSi is from the right edge of the trunk lid?

Here you go Rob, 28mm (from the lower part of the "i")

 

[thehackmechanic]

Thanks!

Thanks folks!