Carburator

Finally mange to adjust the carb, the fault is that the first carb has 2 leaks one from the adjusting screw and one from the shutoff valve. After replacing it works.
I advise all who wants to rectorate these carbs exchange "all" seals it will save you a lot of time.

I adjusted the co to 3% for the idle screws as in the manual and after that at 2%.
But my question is this also valid for ERON 95 unleaded fuel?

Many thanks for the support.

Best regards,
Nico
 
Being these cars are so old, I would adjust the mixture screw to highest RPM at idle and be done with it.
 
You must log in or register to reply here.
Back
Top