Hi guys while I was home for the Christmas holidays I stripped all of the wood from my coupe and have taken it back to China with me and am starting to make up a mould so I can make a few sets!! I am wondering if someone could give me a measurement from from the centre of the trim screwed to the top of the dash wood to a straight edge running across both ends of the same strip where they meet the window pillars?? Cheers Warren
Dashboard Wood
- Thread starter wazza.csi
- Start date
Aussiecsi
Well-Known Member
... Warren, my dash is in a workshop so can't access at the moment but I suspect the "overwhelming " response to your post is that people are wondering what the "mould " thing is about ( given the dash is made of wood ) ...or am I missing something ?
Cheers, Simon
Cheers, Simon
Hi Simon, My Wood Cores are getting pretty tired so I am making a mould so I can make some more cores! My intention will be to offer them to any club members who are interested, I am also looking to make them with or without the Speaker Grill and the Door trims with or without the Ashtray! Currently I am collecting parts to rebuild my car when I move back to NZ, Mt idea is 3.5 M30 or M88 if I can find 1, I have a set of Electric Sport seats from an E24, 25 SQ Meters of Cream Leather, Front and Rear Subframes from an E28 complete with ABS, And I am considering Replacing the wood trims with carbon fibre!! and a lot more thoughts!!
Aussiecsi
Well-Known Member
Depending on how we 're going in cricket / rugby against NZ,would be good if you could go back via Perth .Good bunch of E9 guys here ...
mdf
Active Member
dash wood
Any progress on this project?
-MF
Any progress on this project?
-MF
tomcolitt
(deceased)
I might buy one dash if I can get it in the next one or two months. Do you still need the measurements?....
Tom
Tom