DJET TO MEGA SQUIRT

Jahan

Jahan

Well-Known Member
Messages
150
Reaction score
18
Location
Vienna, VA
1972 CSI 3.5 block, head & turbo from Euro 745I with DJet(!) ran ok. Middle of complete restoration. Would like to convert to a good programable FI system like MS or Electromotive to work with the turbo set up & be able to tune. Recommendations welcome & appreciated.
 
Welcome Jahan,

I'm running megasquirt in my coupe and am very happy. I'd reach out to SFDon for guidance. I believe he has worked on a similar setup- 3.5 M106 turbo setup with megasquirt.
 
Last edited:
i recommend that you seek a conversation with SFDon - he understands d-jet and MS ... and most importantly, the coupe. he has been working on a high end turbo coupe, and although turbos aren't his favorite ... he has working knowledge of all of the things you are considering.
 
IMG_2011.PNG
Howdy- go to Scottie sharpe.com
Those are my files in the library about 1000 pages
There are only 4? People with the original Schematics in the USA for the m106
Let me know if you want a copy
You need to contact me if you want into the site.
 
Last edited:
FYI- I can show you the Ondra connection if you want to go 5 speed and original 013 Ecu with original knockbox
Or go MSPNP2
My 745i 5 speed has run at 22psi.
400 hp
I do have a few sets of 200 injectors brand new never used.
Currently building a coupe with 745i engine with Jon Iverson
I have owned 8 745i cars.
 
OCCoupe said:
Welcome Jahan,

I'm running megasquirt in my coupe and am very happy. I'd reach out to SFDon for guidance. I believe he has worked on a similar setup- 3.5 M106 turbo setup with megasquirt.
Click to expand...
Thank you very much for information. I am in Vienna, VA
 
OCCoupe said:
Welcome Jahan,

I'm running megasquirt in my coupe and am very happy. I'd reach out to SFDon for guidance. I believe he has worked on a similar setup- 3.5 M106 turbo setup with megasquirt.
Click to expand...
Thanks. How do I contact SFDon
 
sfdon said:
FYI- I can show you the Ondra connection if you want to go 5 speed and original 013 Ecu with original knockbox
Or go MSPNP2
My 745i 5 speed has run at 22psi.
400 hp
I do have a few sets of 200 injectors brand new never used.
Currently building a coupe with 745i engine with Jon Iverson
I have owned 8 745i cars.
Click to expand...
HI: My CSi has a 3.5 Block with 745I Pistons. I do not know if the block actually came from a 745I or not. The head does not have any visible markings!
It has on the exhaust side it is all 745i stuff. It does have the CSI DJET! & ran good with no knocking or detonation. I can send pictures. I think a MS system will give me a better flexibility.
 
You must log in or register to reply here.
Back
Top