E9 coil springs

F

Flyboy787i

Member
Messages
12
Reaction score
1
Location
Rye, New Hampshire USA
I’m selling a complete set, front and rear, of Paul Baker springs. Brand new, never been mounted on my car. I decided to go a different way with my suspension and don’t need them anymore. Asking $800 and this price includes shipping within continental USA. Located in NH if you want to pickup. See link below for a discussion in the E9 forum:
Christopher

Thread 'PBCM lowering springs'

I've been through the European offerings for lowering springs (Jaymic / H&R) and have finally found my optimum solution in springs manufactured by Paul Baker, who may of you in the UK will know for his restoration business, and his knowledge of E9's and CSL's.

Previous springs were either too high or knocked over speed bumps, but having just spent a week's driving in the Welsh mountains (which offer an incredible driving experience) i can thoroughly recommend these for a responsive and comfortable drive with an excellent ride height.

springs.jpeg

I believe Paul has these in stock and...
  • Like
 

Attachments

Hey, I went with KW fully adjustable coilovers. Everyone a talked to loves the Paul Baker springs. It gets the nice stance and a very good ride especially when you combine them with either Bilsteins or Koni shocks. Paul recommends Bilsteins.

This is a quote from Paul Baker in this forum
“With reference to the comment by @Drew Gregg we did test the springs on a CSi without rolled arches and on 16" rims and they didn't hit the arch at all, however, I would agree that it's a sensible thing to roll them if they are not already. We can't test every car in every conceivable corner, over all bumps and speed humps or braking during deceleration and cornering etc. One of my CSL's has original 16" Alpinas and standard springs and one has hit the arch so it isn't just a risk with new springs. Don't forget my springs are dual rate so once compressed more when pushed hard they are very slightly stiffer than a standard CSL progressive spring, not much but hopefully enough. It was many attempts on a highly technical spring tester to see the graph on rates.”

Hope this was of help to you.
Cheers,
Mats
 
You must log in or register to reply here.
Back
Top