e9 Doors, Trunk Lids, Bumpers or Bumper Parts, Exhaust and Other

[GK-E30M3]

Listing Several items i have FS

1. Pair of Doors in Pretty good Shape as pictures $500 each
also have a pair in Malaga Color
2. Trunk Lid some rust and surface spots - $200
i have few other trunk lids available
3. Trunk Tool Tray ask for pictures i have several -$200 each
4. Bumper Parts and willing to sell individual pieces
5. Set of Taillights as pictures $500
i have some Taillight Housings available
6. I think i have complete Exhaust system OEM and New NOS for 3.0cs and some for 2800cs please ask Text for info

I have many other items available not listed just need some time feel free to ask for any other parts

Best way is to Text me 708-204-7874

Willing to ship in US especially smaller parts Zelle or Venmo and Paypal works + fees

Thanks
Chris

 

[eriknetherlands]

fyi, the center resonator, this one:

is for an E3. Giveaway is the pin that extends near the part tag. that pin is for a rubber muffler hanger, which the E3 has. The E9 doesn't have a provision to mount a hanger in that location. Neither is there any provision on an e9 for support of the double sided bracket on the right in the picture.
Also the bend geometry is quite off.

If you want it to fit an e9, it requires to chop off the tubes and reweld them at the correct angle. I bought one unknowing, realized it wouldn't fit my e9; and did the chop and weld. It was quite some work.

GLWS.

 

[eriknetherlands]

PM sent on the overrider(s)

 

[GK-E30M3]

fyi, the center resonator, this one:
View attachment 187579
is for an E3. Giveaway is the pin that extends near the part tag. that pin is for a rubber muffler hanger, which the E3 has. The E9 doesn't have a provision to mount a hanger in that location. Neither is there any provision on an e9 for support of the double sided bracket on the right in the picture.
Also the bend geometry is quite off.

If you want it to fit an e9, it requires to chop off the tubes and reweld them at the correct angle. I bought one unknowing, realized it wouldn't fit my e9; and did the chop and weld. It was quite some work.

GLWS.

Yes its a e3 Muffler but i also have a Everything needed for e9 just not pictured