Well I've almost finished resorting my E9. It's been long road and I must thank all those who helped resolve some of the challenges along the way. I am on the home stretch and need some advice once again.
When I began the restoration the wires were not connected to the window switches. I have sinced tested all window motors, reinstalled the circuit breakers and tested all the relays. I have also re-earthed the connections.
My issue is that I don't know which wires go where. I have 10/1974 3.0CS and the window switches have the 5 pin connections. I have a wiring diagram so I know which wires are which (2 wires for each window, 1 for the circuit breaker, 2 brown wires which are earth).
I have attached a photo of the window switch. The numbers are difficult to see. So from top left they 1,3. The bottom row from left are numbered 5,2,4.
So if someone can tell me which wires go to the corresponding numbers it would be appreciated. Thanks.
When I began the restoration the wires were not connected to the window switches. I have sinced tested all window motors, reinstalled the circuit breakers and tested all the relays. I have also re-earthed the connections.
My issue is that I don't know which wires go where. I have 10/1974 3.0CS and the window switches have the 5 pin connections. I have a wiring diagram so I know which wires are which (2 wires for each window, 1 for the circuit breaker, 2 brown wires which are earth).
I have attached a photo of the window switch. The numbers are difficult to see. So from top left they 1,3. The bottom row from left are numbered 5,2,4.
So if someone can tell me which wires go to the corresponding numbers it would be appreciated. Thanks.
