Front turn indicator lens gasket

[Lotuss7]

I am looking for a source for the gasket between the lens and base for the right front turn indicator on my '70 2800CS.

Looked at RealOEM and W&N. No such part is listed. Also looked through old threads and again nothing other than a few discussions on "O" rings substitutions.

Is the anyone supplying such parts?

Thanks in advance,

John

 

[NilsH]

This one (both sides)?
https://www.ebay.de/itm/BMW-E9-2-5-...-Satz-Blinkerdichtungen-topp-NEU/153082409140

 

[teahead]

https://www.turnermotorsport.com/p-147376-63131811103-genuine-bmw-part/

https://www.turnermotorsport.com/p-147376-63131811104-genuine-bmw-part/

 

[HB Chris]

He is looking for the lens gasket, not the housing gasket.

 

[Marco 54]

Not cheap but available from Jaymic -
https://www.jaymic.com/front-indicator-lamp-seals-lh-rh.html

Cheers.

Marco

 

[lsquaredb]

I ended up using the O-rings for my blinker lenses. The O-ring works ok, but it's thicker than original gasket, so the lens sticks out a few mm more than it should.

John, send me a PM with your address and I'll send you a couple for free.

Leonard

'70 2800CSA Bristol

 

[Lotuss7]

Thanks all.

Chris is correct I am looking for the gasket between the lens and the base.

The links forwarded (greatly appreciated all!!!) are for between the base and car body.

Leonard. I have came across some unique “O” rings when working on another project which are flattened and have a low profile. I think they will work well for this application. If they don’t I will take you up on your offer.

So now really looking for the perimeter gasket.

May ultimately try hand cutting a gasket.

John