I've decided to sell my 1973 3.0CS shell / chassis. This is a sunroof car. Some work has been done - see my build thread for more info: https://e9coupe.com/forum/threads/the-raven-e9-project.26879/
With the shell comes a mountain of sheet metal. An itemized list is included below.
$5,000.00 for the chassis and over $7,000 worth of sheet metal. Included is the chassis dolly I fabricated.
The chassis would make a great car if the metal work is completed. Or it, along with the panels, could be a great donor for another car. I'll try to post details of the car, and will try to add more photos this weekend. Let me know if you want to see anything specific. Please let your local restoration shops know - this could be a great deal for a shop that works on E9s.
The car was dipped and is currently bare. Time is of the essence!
Here is a photo of the chassis on dolly last weekend. It has been moved out of my garage.
On the wall of my garage are the hood, deck lid, BMW rear panel, trunk floor, chin piece, doors. Everything is is good shape.
Here is a spreadsheet of the sheet metal panels included: Receipts are attached further down.
Some photos of the chasses right after dipping 4 years ago (and before I did anything to it):
And some photos of my work (many more in my build thread):
With the shell comes a mountain of sheet metal. An itemized list is included below.
$5,000.00 for the chassis and over $7,000 worth of sheet metal. Included is the chassis dolly I fabricated.
The chassis would make a great car if the metal work is completed. Or it, along with the panels, could be a great donor for another car. I'll try to post details of the car, and will try to add more photos this weekend. Let me know if you want to see anything specific. Please let your local restoration shops know - this could be a great deal for a shop that works on E9s.
The car was dipped and is currently bare. Time is of the essence!
Here is a photo of the chassis on dolly last weekend. It has been moved out of my garage.
On the wall of my garage are the hood, deck lid, BMW rear panel, trunk floor, chin piece, doors. Everything is is good shape.
Here is a spreadsheet of the sheet metal panels included: Receipts are attached further down.
Some photos of the chasses right after dipping 4 years ago (and before I did anything to it):
And some photos of my work (many more in my build thread):
Attachments
-
20240910-receipts 11.jpg172 KB · Views: 30
-
20240910-receipts 10.jpg227.5 KB · Views: 30
-
20240910-receipts 09.jpg199.4 KB · Views: 27
-
20240910-receipts 08.jpg393 KB · Views: 26
-
20240910-receipts 07.jpg170.9 KB · Views: 28
-
20240910-receipts 06.jpg154.3 KB · Views: 25
-
20240910-receipts 03.jpg162.5 KB · Views: 25
-
20240910-receipts 02.jpg192.6 KB · Views: 22
-
20240910-receipts 04.jpg181.3 KB · Views: 20
-
20240910-receipts 05.jpg191.7 KB · Views: 18
Last edited: