FS: B-Pillar Kick Plates

J

Jim Stone

Well-Known Member
Messages
209
Reaction score
41
Location
St Leonard, Md
Have (5) spares: (3) chromed brass with three holes for the door catch (for 2000c/cs) and (2) aluminum with four holes (E9).
Good or better condition. All need cleaning, buffing and polishing. More photos upon request. Prices world-wide vary from $198 each up to $515 (w/rubber) each.
Selling these spares for $125@ OBO plus shipping.
Thanks!
 

Attachments

  • IMG_4516.jpeg
    IMG_4516.jpeg
    878.5 KB · Views: 55
  • IMG_4515.jpeg
    IMG_4515.jpeg
    875.2 KB · Views: 53
Last edited:
I would think the flat ones, without pattern on them and 3 holes, are actually chromed brass. Are they quite thick and about 3 times as heavy as the alu ones?

I believe they are 2000cs pieces.
 
Could be. Definitely not magnetic yet heavier than the aluminum ones. I looked up RealOem for the E9 but didn’t for the 2000. Thanks much for the advice. Jim
 
here a nice, derelict, 2000cs sporting the mirror-like (well, once-upon-a-time....) doorjambs covers:
www.beverlyhillscarclub.com

1966 BMW 2000CS | Beverly Hills Car Club

1966 BMW 2000CSThis very desirable project 1966 BMW 2000CS is available in red with a black interior. The vehicle comes equipped with a manual transmission and includes various miscellaneous parts. An excellent candidate with tremendous potential for restoration. This very desirable project 1966...
www.beverlyhillscarclub.com
1740499442854.png
 
eriknetherlands said:
I would think the flat ones, without pattern on them and 3 holes, are actually chromed brass. Are they quite thick and about 3 times as heavy as the alu ones?

I believe they are 2000cs pieces.
Click to expand...
I love learning something new about these cars.
 
Correction needed regarding the three kick plates that I erroneously said were made of stainless steel.
These three are chromed brass and fit the 2000c/cs models. And note they have three holes for the door catch.
My thanks to “eriknetherlands” for calibrating me. ⚓️
$125 OBO plus shipping.
 
Happy to help.

Getting parts to new owners that can actually use them will make both sides of a trade feel better.

Me thinks, that with an extra hole, they will fit an e9 though. A nice variation perhaps ?

A 2000cs rear bumper also looks good on an e9 I think.
My car has a chrome rearview mirror from a 2000cs instead of the plastic e9 version.
Conformity can be dull sometimes.
 
You must log in or register to reply here.
Back
Top