FS: BMW jack, early E9 - sold

dbower

dbower

Well-Known Member
Messages
583
Reaction score
389
Location
Athens, Georgia
More spring cleaning. Vintage BMW jack but somewhat later (I think) than E9 because the crank handle is attached. HBChris or Markos can confirm actual fitment/origin. Very good condition with a few paint scratches. Likely has genuine German grease in it! How about $25 plus actual shipping from GA 30677?

Don

IMG_2732.jpg
 
dbower said:
Sandhu: The jack weighs 6.2 lbs plus whatever packaging. FedEx says Georgia to England is $220 USD. That can't be right so I must be missing something.
Click to expand...
Must be going to England 3 times. ;)

Fair price on the jack!
 
Well, Chris raises an interesting point. Since several 2002's have darkened my doors, I don't know if this may be a 2002 jack. I don't want to misrepresent it. Here is a pic of the only markings I find on the jack -- different than the "Storz" indicia on Chris' example. Note also that my jack crank has a 90 degree rod poking out, as in the diagram that Dan posted. Short of a Jack FAQ, can anyone confirm where my jack belongs?

IMG_2742.jpg
 
Don, Your lifting point is the same as mine, it’s not 2002. On the other side on mine there is a translation, for cars with rear disc brakes use wheel chock.
 
This is the jack I bought for the e9 since I couldn't find one like the one that I posted earlier and it does fit. It has the 19mm hex so I can use the lug wrench, I couldn't find any names or numbers on it.
 

Attachments

  • Jack.jpg
    Jack.jpg
    209.7 KB · Views: 124
Last edited:
HB Chris said:
www.bmw2002faq.com

Factory 2002 Car Jack + Tire Iron (OEM)

Price:: 45 Location: : Montreal, Canada BMW Factory Car Jack & Tire Iron. In very good condition. I don't need them... so maybe someone else can use them.
www.bmw2002faq.com www.bmw2002faq.com

Here is a 2002 jack, very different. Dan, that jack looks like early 2002 I think.
Click to expand...
Interesting as it seems to fit and I bought it from CoupeKing advertised for the E9.
We have a couple 2002's so when able I will check them out.
Don's sure looks like the one in the RealOEM for my car but not sure how it will fit.
 
You must log in or register to reply here.
Back
Top