FS. E9 parts and More

K

Koopman

Well-Known Member
Site Donor $
Messages
2,814
Reaction score
657
Location
Uxbridge,Ma
I still have some parts I would like to sell before my new surgery scheduled for October. I will be out of commission for at least a couple of months.
Wiper Motor
A pair of Front Bumper Horns in near excellant condition with rubber attached.
Passenger side front fender Belt Trim.
Misc. Interior parts,door handle and window crank trim.
Right rear window regulator.
Left and Right E28 plastic front grilles.
Left and Right 2500 complete rear tail lights with excellant chrome surrounds.
Just arrived: Red and Green screwdrivers.
Complete set of tools with E24 tray.
Complete set of tools with E12 tray
I'm not sure what future health issues I may have and if I will be able to continue this service after October so I am accepting offers on all above items.
Thanks for all the fun I am having since becoming a member of this forum.
Koopman
 
Harry
I hope this hospital visit goes 100x better than last year. Too bad they are such dangerous places with regard to secondary infections. I still owe you a few iced coffees.

John
 
My added wishes for successful surgery and both successful and prompt recovery. My wife has experienced 5 back surgeries in the past 3 years, and probably will never have full recovery. Pain and restrictions are a way of life for her. As she says 'getting old isn't for wimps'. I hope your recovery is MUCH better. Our old cars need YOU!
 
eriknetherlands said:
Dear Koopman,
Hope that all goes well with your health.
PM sent.
Click to expand...
Hi Eric;
Thanks for caring. As far as the Dutch name I use. I grew up and my best friends were mostly Dutch,quite a difference from my Armenian Heritage.
I use the name because of the simmalarity to the Coupe that most members use in their user names. I hope we can get negotiate a deal on the tools.
Thanks
Harry
 
Dear Harry,
Steve Benirschke here from Seattle. Good luck on your upcoming surgery. If you have front door panels in good condition, I am interested. I would love tan ones, but if any color is in good shape, I will dye them. Thanks for answering, and once again, good luck.
 
skb said:
Dear Harry,
Steve Benirschke here from Seattle. Good luck on your upcoming surgery. If you have front door panels in good condition, I am interested. I would love tan ones, but if any color is in good shape, I will dye them. Thanks for answering, and once again, good luck.
Click to expand...

Thanks Steve. You are talking E9 correct?
Koopman
 
Yes. I have a 2800 CS, originally Automatic, converted to overdrive 5 speed, now with Weber carbs, stainless steel exhaust. I converted the black interior to the lighter tan color (paint Malaga), and converted the crank front windows to electric. I would love front door panels with the holes where the ELECTRIC motors are, rather than what I have, which is the higher more forward hole for the old crank assembly. If I can't find tan, I found a guy who has experience with changing the color. I've seen solid new panels in black with no holes, but they are pricey, and I wonder if they are the same as the original when I see pictures of them. Any help you can give me would be appreciated. I wish I was in Monterey right now...
 
skb said:
Yes. I have a 2800 CS, originally Automatic, converted to overdrive 5 speed, now with Weber carbs, stainless steel exhaust. I converted the black interior to the lighter tan color (paint Malaga), and converted the crank front windows to electric. I would love front door panels with the holes where the ELECTRIC motors are, rather than what I have, which is the higher more forward hole for the old crank assembly. If I can't find tan, I found a guy who has experience with changing the color. I've seen solid new panels in black with no holes, but they are pricey, and I wonder if they are the same as the original when I see pictures of them. Any help you can give me would be appreciated. I wish I was in Monterey right now...
Click to expand...
Hi Steve;
I am not an expert on parts for your car. Are the door panels the same as an E9?
 
Koopman said:
Hi Steve;
I am not an expert on parts for your car. Are the door panels the same as an E9?
Click to expand...
Yes, I have an E9, 1970 2800 CS, converted the crank windows to electric. trying to find door panels that have the holes where those electric motors are.
SKB
 
You must log in or register to reply here.
Back
Top