On behalf of @Lucas I tested and refurbished this set:
MAP sensor:
- cleaned, verified winding resistance, verified that it holds the suction pressure
- installed on my CSI and did a test run without noticing any performance issues
Cold start relay and Main relay:
- did a function test
- disassembled the housings, cleaned by glass blasting, applied engine coating.
Mounting plate:
- yellow galvanised
- comes with new screws
The complete set costs 750€ plus shipping from Germany.
An ECU would also be available, but I didn't find time for testing, it's end of season now.
Furthermore this ignition wire harness, cut in two pieces, at 100€ only.
MAP sensor:
- cleaned, verified winding resistance, verified that it holds the suction pressure
- installed on my CSI and did a test run without noticing any performance issues
Cold start relay and Main relay:
- did a function test
- disassembled the housings, cleaned by glass blasting, applied engine coating.
Mounting plate:
- yellow galvanised
- comes with new screws
The complete set costs 750€ plus shipping from Germany.
An ECU would also be available, but I didn't find time for testing, it's end of season now.
Furthermore this ignition wire harness, cut in two pieces, at 100€ only.
Attachments
Last edited:
