Fuel filler seal

E

e30strube

Well-Known Member
Messages
152
Reaction score
21
Location
Houston, TX
Is there a gasket or some other seal where the filler neck goes through the body of the car? My car doesn't have anything, but that would seem like a place for water to get into the trunk. I didn't see anything on Realoem under fuel system, body work or trim.
 
I know the tank doesn't look the same, but it shows a part number... Interesting, as I'll need one once I'm at the assembly phase...
And there's a pic of mine before I take it out...

Screen Shot 2018-09-13 at 9.40.40 AM.png

IMG_0137.jpg
 
When looking up that part number, it appears to be the actual seal for the cap and not the seal in your picture. I'm guessing the part number that's needed is the one just below the number 3 piece that isn't numbered.

A Google search for gas tank filler neck grommet comes up with several options... something like this may actually work, but I will need to check the sizing.

https://www.fillernecksupply.com/19...UG00MAn0nPORR2hHSts3p3nUuIAuY95RoCQSQQAvD_BwE

Challenger_charger_coronet_satellite_road_rubber_daytona_super_bee_polara_sport_fury_Mopar_C_Body_B_Body_E_body_fuel_tank_filler_neck_grommet_seal__30247.1426210171.jpg
 
You must log in or register to reply here.
Back
Top