HELP Photographs requested!

[Malc]

Hi there,
Could somebody either send or point to where I can get some pictures of the rear wing, both sides, especially at the bottom where the jacking point is and where it meets the sill at the rear of the door apperture.
The Dear old Bucket's rear jacking points disappeared a long time ago so I am not exactly sure of how this area goes back together.
Appreciate the help,
Malc

 

[Bryce]

I hope these pics are helpful. I didn't take pics of both sides unfortunately.
Bryce


http://s167.photobucket.com/albums/u154/Brycecsl/?action=view&current=bmw2go1.jpg
http://s167.photobucket.com/albums/u154/Brycecsl/?action=view&current=BMW2go4.jpg
http://s167.photobucket.com/albums/u154/Brycecsl/?action=view&current=BMW2go12.jpg

 

[kasbatts]

My god Bryce! your my hero for undertaking that! I think I would have done my self in when I saw that front end

Steve

Auckland NZ

 

[Malc]

Thanks Bryce,
They are a geat help, have you any of when the wings are back on...... so I know where the jacking point is supposed to be and at what angle it lies at?
Have to say that is some serious work for a glove box hinge and a couple of pieces of rubber trim :wink:

Cheers
Malc

 

[TILLA]

Malc,

Hope these help, unfortunately my car can't be moved so I couldn't get both sides. Let me know if you need anything more specific.

Mark

 

[G]

Here are s few more..might have seen them already
http://www.fototime.com/inv/D23B10D6ADDAC9C

 

[Bryce]

G's pics look good but sometimes more the better so here's my contribution (left and right side).

Malc I had not forgotten - if you can let me know your a/c ([email protected]) I can send a donation!

Cheers,
Bryce

http://s167.photobucket.com/albums/u154/Brycecsl/?action=view&current=DSC_0112.jpg
http://s167.photobucket.com/albums/u154/Brycecsl/?action=view&current=DSC_0113.jpg

 

[Malc]

Thank you all

I now have an idea of how to er hammer the repair panel into shape to get it to fit!

Malc

 

[Malc]

Just want to say thank you AGAIN to all of you who posted / sent pictures they have been very helpful.
Dave B came around to day so I attacked his car with a tape measure, confirming my thoughts after looking at the pictures.

I have started to attached the parts using self drilling screws!!! before starting to weld - scary

Of course I had completely forgotten about the sill (rocker) covers that are fitted - that's one for another day as I have seen them in black, polished stainless, and body colour with and without the lower moulding!
Thanks again
Malc