Hub diameter

[73 E3]

I need to know what the wheel hub bore diameter is for my E3. I'm assuming it's the same as the E9's as well. I'm looking at running a thin spacer to push my new wheels out slightly to get the correct stance. I've searched and searched and came up dry. Any help is much appreciated.

 

[MichaelP]

72.5mm

 

[73 E3]

Thank you very much sir.

 

[cpeavey]

Ireland Engineering sells spacers in two thicknesses, 10 and 15 mm, for our hubs: http://store.nexternal.com/shared/S...reType=BtoC&Count1=482952296&Count2=400092720

Charlie Peavey

 

[73 E3]

Those 10mm spacers are exactly what I'm looking for. I picked up a set of 14x6.5" et22 BBS Mahle wheels from a local wrecking yard for free. Of course I would have preferred the 14x7 et11 version, I couldn't pass up a set for free. I'd like to use the 10mm spacer to bring them out more like their 14x7 counterparts. I'm assuming I'll need to use a longer set of studs for these correct?

 

[cpeavey]

Probably. I would give them a call; they know their stuff, and they might have the studs as well.

I bought a set of spacers from them to put E30 wheels on my 2002.

Charlie