Interest in a reproduction trunk mount tool box?

C

coupeguy

Well-Known Member
Site Donor
Messages
357
Reaction score
26
Location
Northern Colorado
I am working on a possible reproduction of the trunk mount tool box. It will be as close as possible to original, but some things must change since doing it in a thermoset does not allow the melted posts that retained the living hinge pieces of the original. Not sure what that will be yet, also not sure if the foam tray is possible, might be sold without the tray but assembled with the two pieces hinged together. Plans are sketchy right now, but if you think you would be interested in a repro at around $500 I would appreciate your input. Let me know by posting or emailing me at [email protected].

If you have a perfect box you would like to donate to make molds let me know, you will get at a minimum a repro or two and hopefully your original back in the same condition.
Dan
 
Re E9 Tool Box.

Hi Guys these are still available from BMW I can supply for $125 Euros Each, Part No is 7111 1115 329!! Foam Pad 7111 1113 754 $30 Euro's Each! Price would be Ex Germany Freight would depend on how many you were after and where they were sent to!! Cheers Warren
 
Last edited:
That's just the tools (green screwdrivers) and no box.

wazza.csi said:
Hi Guys these are still available from BMW I can supply for $125 Euros Each, Part No is 7111 1115 329, The Diagramme looks like it may include all the tools but I would have to check on that!! Price would be Ex Germany Freight would depend on how many you were after and where they were sent to!! Cheers Warren
Click to expand...
 
Boot Lid Tool Box

This is a new Genuine BMW tool box, it does not include the tools, If you need the tools I can price them all Indervidually!! Cheers Warren
 
wazza.csi said:
Hi Guys these are still available from BMW I can supply for $125 Euros Each, Part No is 7111 1115 329!! Foam Pad 7111 1113 754 $30 Euro's Each! Price would be Ex Germany Freight would depend on how many you were after and where they were sent to!! Cheers Warren
Click to expand...

This tool box is the later "half shell" unit that was fitted to the late-late E9 coupes (late 1974> ?), E3, and E12, E24, and E28 cars. I have one as fitted on my 88 M6, with the plastic used on this type of tool box is virtually indestructible and will probably outlast the car. With a little modification to the E9 trunk lid, it can be made to fit the coupe. The E9 full clam shell tool box has been forever NLA.
 
Yes you are correct, ETK does list it for the 3.0 Coupes and doesn't specifiy a year but it is listed for most models up to the mid 80's.
 
You must log in or register to reply here.
Back
Top