Ireland Engineering big brake conversion

[daicos35]

Does anyone have any experience with the bolt on, wilwood front brake conversion kit offered by Ireland , listed above?
It uses larger rotors and wilwood calipers (I have 16 inch wheels).
Any other sources for a bolt on, larger front brake conversion, that you guys can recommend?
Thx mike

 

[mark91]

I am currently doing the swap... let me know if you have specific questions. or pm me and we can talk on the phone
mark

 

[glenn in encinitas]

big brake question

:?: Does Ireland suggest the front/rear bias valve be replaced as well when you do the big brake upgrade? I assume they do, but want to know if they made a point of it.

Glenn

 

[Tom M]

Why do you want to do this? The OEM brakes (in good condition) are more than adequate.
Are you going to paint the calipers red as well?

 

[daicos35]

from a personal point of view, I will be building an engine with approx 270 bhp, so although red calipers do not make a car go faster , 30% increase in horsepower will.

 

[mark91]

The kit is very nice...SUPER light... major reduction in unsprung weight, and keeps up with the 300 plus H.P.!
mark

 

[daicos35]

thx mark