Is this an e3/e9 part?

[eriknetherlands]

Came with carb stuff, which also had weber parts.
Hose clamps have "BMW" on them.

Anyone an idea what part it is?

 

[eriknetherlands]

Part 2. Fuel.line perhaps, but where?

 

[eriknetherlands]

Part 3 (the dirty one) Carb linkage, but is different then mine. E12?

(The shiny one matches the one on my e9 car, its straight)

 

[bavbob]

#1 I believe is E3, I will confirm as I am getting mine out of storage

 

[HB Chris]

Pic 1, not BMW
Pic 2, pipe from clutch reservoir to to master cylinder
Pic 3, rod can be straight or bent, I have seen both

Bent one has the arm for the idle slow down solenoid

 

[bavbob]

Crap, Chris is correct as always. I had a senior moment as I was swapping storage of the E3 for our 67 mustang and of course, I had to pour gas into the carbs on both to get them running (I have the one way return valves but still..). I go the engine bay images in my head mixed up. That part in picture 1 looks Ford-ish....or is that foolish?

 

[Belgiumbarry]

isn't that pic#1 the fuel hose between the 2 injection rails ? 1 fuel inlet , 1 return with pressure regulator ?
I just guess, as i only had carb'd E9s....

 

[Wladek]

isn't that pic#1 the fuel hose between the 2 injection rails ? 1 fuel inlet , 1 return with pressure regulator ?
I just guess, as i only had carb'd E9s....

Not D-Jet CSI for sure