Junkyard E9

Brendan,

you might want to be more specific as to which one you want - and where you are located. for instance, there are 3 or 4 basic rear panels between the taillights. 1 has license plate lights on it, 1 does not (early one). then there are the ones that have the foglight in it ... i know there is one with license plate lights and foglight ... just not sure about the early one (no license plate lights) with a foglight. the ones without the license lights are generally more expensive

good luck in your search.
 
I don't need these things, but there always seems to be someone looking for certain interior parts. If its shiny and on the inside, someone probably is looking for it - like the seat rail covers, chromed plastic trim below the front seats, etc.
....and of course, don't forget to grab the toolkit if still there!
 
rsporsche said:
Brendan,

you might want to be more specific as to which one you want - and where you are located. for instance, there are 3 or 4 basic rear panels between the taillights. 1 has license plate lights on it, 1 does not (early one). then there are the ones that have the foglight in it ... i know there is one with license plate lights and foglight ... just not sure about the early one (no license plate lights) with a foglight. the ones without the license lights are generally more expensive

good luck in your search.
Click to expand...

RS Porsche , thanks, Like you Im in ATL as well !
Im building a CSL race car so honestly I could care less which I get I just want a piece that goes between the taillights
beggers can't be chosey !
 
rsporsche said:
brendan,

i sent you a PM. tell us about your csl
scott
Click to expand...

Ill start a build thread once we start making some progress and things are more exciting ! Right now its just me spending money and stripping out a rust bucket !
 
So here's the report; VIN on the steering column is/was 2220329. Diff was stamped 1138 so it seems to be a 3.45 with no "S" indicating LSD. The wood is trashed and someone cut off the drivers front fender. The defrost vents were so brittle they broke in my hands. There was no chrome strip between the taillights. The tube that holds the spark plug wires was plastic/rubber and not metal so I didn't pull that for whoever had requested it.

I took the following off the car and will be PMing pictures to those who showed interest.

Windshield wipers, linkage, motor
(2) Relay sockets
Sun visors (snap in clips were broken unfortunately)
Washer bottle and pump
 
You must log in or register to reply here.
Back
Top