Looking for Alpina e9 front airdam that fits

  • Thread starter Thread starter guanshee
  • Start date Start date
These are a nice look, but impractical for inclined driveways or steep speed bumps. At 100mph my e9 (no aerodynamics) was very stable, but at 135mph it was very light in the front end and although the car could go faster I wouldn’t (even in my middle-aged youth 30 years ago). So you must ask yourself, do you want to drive your car REALLY fast, or just look like you can?
 
Jellobmw said:
These are a nice look, but impractical for inclined driveways or steep speed bumps. At 100mph my e9 (no aerodynamics) was very stable, but at 135mph it was very light in the front end and although the car could go faster I wouldn’t (even in my middle-aged youth 30 years ago). So you must ask yourself, do you want to drive your car REALLY fast, or just look like you can?
Click to expand...

I want to drive really FAST :)
Of course looking fast is delightful...
 
Where are you? I have an original E9 alpina b5 airdam with "alpina "molded into fiberglass just like the ones you see here but original from the first factory mold years ago. Came from one single owner car he sold to me....... but took it off years later whch is one of 3 e9 's i have and it trial fitted fine on all of them. This was included in my car purchase.No aftermarket stickers on it just alpina letters molded into the inside lip
Needs some easy work by a reasonably qualified fiberglass guy or body guy for the upper skirts that goes up onto the lower front fender part ..... no cracks anywhere. Not cheap as I have a guy that can repro them correctly if I ever get the time..do not want this rare original.on my car but would mount the repop i will have done someday
guanshee said:
Thanks but I'm looking for the Alpina version.
Click to expand...
 
You must log in or register to reply here.
Back
Top