Looking for wiper linkage

Gary Waggoner

Gary Waggoner

Well-Known Member
Site Donor
Messages
450
Reaction score
204
Location
San Clemente
Pretty much the last piece in the puzzle. When I had the linkage refinished the knurled end where the wiper arm slips on disintegrated. I have tried to find a replacement end and after purchasing about a dozen hopefuls, I am still in need. I dont car about the condition as long as the knurled part is intact I can swap them over to my linkage. Anyone? I also am willing to swap over to the new style bolt down arm if anyone has a source for these arms. I have 2 like new old style arms that were on my 70 2800cs with new Bosche blades installed.
 
Last edited:
Gary Waggoner said:
Pretty much the last piece in the puzzle. When I had the linkage refinished the knurled end where the wiper arm slips on disintegrated. I have tried to find a replacement end and after purchasing about a dozen hopefuls, I am still in need. I dont car about the condition as long as the knurled part is intact I can swap them over to my linkage. Anyone? I also am willing to swap over to the new style bolt down arm if anyone has a source for these arms. I have 2 like new old style arms that were on my 70 2800cs with new Bosche blades installed.
Click to expand...

Hi Gary,

Don’t stop the hunt but I can likely source you some early next week. Shoot me a text.
 
Gary Waggoner said:
Pretty much the last piece in the puzzle. When I had the linkage refinished the knurled end where the wiper arm slips on disintegrated. I have tried to find a replacement end and after purchasing about a dozen hopefuls, I am still in need. I dont car about the condition as long as the knurled part is intact I can swap them over to my linkage. Anyone? I also am willing to swap over to the new style bolt down arm if anyone has a source for these arms. I have 2 like new old style arms that were on my 70 2800cs with new Bosche blades installed.
Click to expand...

Gary, Shoot me a pic of exactly the piece you are looking for. I may have one I pulled off my 70 2800. Plus I am local in OC.
 
I need 2 of these.. Splines in good shape are important.
 

Attachments

  • Screen Shot 2019-12-16 at 10.48.42 AM.png
    Screen Shot 2019-12-16 at 10.48.42 AM.png
    2.4 MB · Views: 164
Gary, I will check if i have these in the next 2 days. will shoot you a pic when I confirm what I have.
 
Gary Waggoner said:
That would be cool thanks.
Click to expand...
Gary, I found the wiper assembly. Not the cleanest but the wiper splines and threads to hold down the assembly seem good. I throw some aircraft stripper and run a blade over the threads to clean them up even further. Have a look.

20191217_115656.jpg20191217_115659.jpg20191217_115707.jpg
 
Ajay said:
Gary, I found the wiper assembly. Not the cleanest but the wiper splines and threads to hold down the assembly seem good. I throw some aircraft stripper and run a blade over the threads to clean them up even further. Have a look.
Click to expand...

That setup looks very clean!
 
Gary Waggoner said:
That would be great. I will touch base with you then. Thanks again.
Click to expand...

Gary, lets try to meet tomorrow between 10 and 12 if that works for you. I would love to see that beautiful coupe if you are able to bring it. I will shoot you a pm with my cell.
 
You must log in or register to reply here.
Back
Top