paul corcoran
Well-Known Member
hi all,
its taken me a while to get some very close match 'elephant skin' vinyl but i now have a supply (match of the grain is very close) so here is a new 6mm birch ply trunk floor panel !
we covered this one today, and after a bit of trial and error realised the best way to stretch the vinyl out was to use a heat gun to loosen it up and it went round the curves really well. the panel is a 6mm birch ply with the correct timber batons, holes etc templated from originals
'the don' a forum member here in the UK has ordered a set of 5 pieces (2 floor, 2 trunk lid and the bullhead panel) so we are getting them together now
apologies for the mobile phone image, ill get some decent images sorted this weekend, in the meantime i have the bare panels listed on ebay UK
http://www.ebay.co.uk/itm/251149109...LX:IT&_trksid=p3984.m1555.l2649#ht_500wt_1219
new dash and wood trim pieces coming very very soon
thanks paul
its taken me a while to get some very close match 'elephant skin' vinyl but i now have a supply (match of the grain is very close) so here is a new 6mm birch ply trunk floor panel !
we covered this one today, and after a bit of trial and error realised the best way to stretch the vinyl out was to use a heat gun to loosen it up and it went round the curves really well. the panel is a 6mm birch ply with the correct timber batons, holes etc templated from originals
'the don' a forum member here in the UK has ordered a set of 5 pieces (2 floor, 2 trunk lid and the bullhead panel) so we are getting them together now
apologies for the mobile phone image, ill get some decent images sorted this weekend, in the meantime i have the bare panels listed on ebay UK
http://www.ebay.co.uk/itm/251149109...LX:IT&_trksid=p3984.m1555.l2649#ht_500wt_1219
new dash and wood trim pieces coming very very soon
thanks paul